WindSim Forest Model

More documents

Recommendations

Info

Wind Profile at 7 analysis pointsWindspeed Vertical Profiles [f45]1901:1700m up wind1702: 200 m up wind1503: 200 m into forest1304: 5000m into forest5: 300 m down wind1106: 2300m down wind907: 7500m down wind705030102.5 3.5 4.5 5.5 6.5 7.5 8.5-10
Pre-Tests• Solver/Convergence– Coupled: ca 500 iterations– Segregated: ca 6000 iterations– Similar results from Segregated and Coupled Solver– Similar time required• Segregated takes about 5 times more iterations than coupled, but every iteration is 5 times faster– Crashes in particular casesUsed coupled solver with 1000 iterations (ca 4.5hrs)• Upper BC– wall or pressure?used wall to avoid “leakage”
Page 1 and 2: WindSim Forest ModelA pragmatic sea
Page 3 and 4: Background
Page 5 and 6: Forest Model Parameters• Forest H
Page 7 and 8: Initial setup• Artificial Terrain
Page 9: Wind speed (f80)Height: 80 Meters
Page 13 and 14: Profile changes without forestWinds
Page 15 and 16: Artefacts in Plain Terrain of a Lon
Page 17 and 18: Questions• Reason for diverging p
Page 19 and 20: Study Results
Page 21 and 22: What should it look like
Page 23 and 24: Turbulence assessment
Page 25 and 26: Comparison Graphs• Height (10m 25
Page 27 and 28: Forest height changeTurbulence: 10
Page 29 and 30: Porosity changesTurbulence: P=0.5 v
Page 31 and 32: C2 Changes at low porosity P=0.25Wi
Page 33 and 34: C2 Changes at low porosity P=0.25Tu
Page 35 and 36: Summary Porosity vs. C2 ChangesTurb
Page 37 and 38: Next Steps
Page 39 and 40: Thank You
Page 41: General Questions• Reason for div

WindSim Forest Model

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?