BALL LOCK ® MOUNTING SYSTEM QUICK CHANGE ... - Jergens Inc.

www.jergensinc.comBALL LOCK ®Locating and Clamping ShanksMOUNTING SYSTEMMETRIC DIMENSIONS1MU.S. Patents: 3,498,6534,135,418Replacement KitsLocating and Clamping Shank DimensionsShankDiameter(mm)A13162025303550FixturePlateThickness±0.13mm132020252025202520252025405020254050• Material: Shank/Bushing, AISI 4340Liner, 52100• Finish: Black Oxide• Heat Treat: Shanks, RC 40-45Bushings, RC 50-54Liners, RC 62-64• Operating Temperature Range:-30°C to 200°C• Stainless Steel availableHead of ShankShankPartHeight DiameterNumber B C D49655496564965749658496514965249661496624967149672496814968249683496844969149692496934969468101013132022324045506075Each Kit Includes:• Replacement Screw• Locking Balls• Drive Ball• O-Ring27.634.636.541.539.544.544.049.049.054.051.056.071.081.064.069.084.094.0HexWrench SizeForSet Screw2.53345610DCAAny Ball Lock ® application requires at least two sets ofshanks, receiver bushings and liners. The liners areplaced into the fixture plate to insure extremely accuratepositioning. If more than two shanks are required (toprovide additional hold down force), omit the liner bushingso that these additional holes will not interfere with yourprimary locating holes.See page 1.33 for Fast Acting Shanks.MaximumScrew HolddownTorque Force(N.m) (KN)1.2 3.34.55.3111833655.313.330446888BRecommendedScrew HolddownTorque Force(N.m) (KN)1 2.73491525503.51023355267ShankRepair KitPartNumber499554995649957499584995149952499614996249971499724998149982499834998449991499924999349994METRIC BALL LOCK ® COMPONENTSPhone 800-537-4367 or +1 216-486-5540 • Fax: +1 216-481-6193 • E-mail: info@jergensinc.com • www.jergensinc.com 1.31