BALL LOCK ® MOUNTING SYSTEM QUICK CHANGE ... - Jergens Inc.

www.jergensinc.comBALL LOCK ®MOUNTING SYSTEMINCH DIMENSIONS1Ball Lock ® Fixture Plates• Cast Aluminum or FreeMax 15 Steel or equivalent• Thickness tolerance ±0.005"• Parallel within 0.001" Steel• 6061–T-651 Aluminum plates, within .001 available upon requestAluminum Ball Lock ® Fixture Plates with 2 Primary Liners InstalledPlate PartPlate PartNumber Weight Number WeightAluminum (lbs) Steel (lbs)PlateDimensions(in.)PlateThickness(in.)±.005Shank SizeDia. (mm)Ball Lock ®ShankPartNumber28706 9 28806 34 9.97 x 16 3/4 20 4960128711 12 28811 36 12 x14 3/4 20 4960128713 14 28813 42 14 x14 3/4 20 4960128715 18 28815 55 16 x 16 3/4 20 4960128722 16 28822 48 12 x 14 1 25 4961228724 19 28824 56 14 x 14 1 25 4961228726 24 28826 73 16 x 16 1 25 4961228719 23 28819 68 20 x 16 3/4 20 4960128727 38 28827 114 20 x 20 1 25 4961228731 11 28831 32 15 x 10 3/4 16 49608– – 28801 80 16 x 16 1 1/8 20 49602• Machined to close tolerances• Repeatability ±0.0005" or better• Reduces fixture set-up andassembly time• Provided with 5/8" bored holes forsine fixture keys• For horizontal or vertical machiningcenters, Tool Room Mills, ormultiple pallet machining centersINCH PRE-MACHINED FIXTURE/SUBPLATESCustom Sizes AvailableJergens will make Ball Lock ® fixture plate or subplates to yourspecifications. Call 1-800-JERGENS for further information.15x10x3/4" Fixture Plate Bridgeport Style12x14x3/4" Fixture PlateAluminum PlatePart Number Wt. (lbs)28731 11Steel PlatePart Number Wt. (lbs)28831 32Aluminum PlatePart Number Wt. (lbs)28711 12Steel PlatePart Number Wt. (lbs)28811 369.00004.000Clearance Hole forHolddown (2) Places5/8 Bored Holes forSine Fixture Keys(2) Places(2) 16mm PrimaryLiners Installed8.000012.0000Clearance Hole forHolddown (2) Places5/8 Bored holes forsine fixture keys(2) places12.00006.000(2) 20mm PrimaryLiners InstalledPhone 800-537-4367 or +1 216-486-5540 • Fax: +1 216-481-6193 • E-mail: info@jergensinc.com • www.jergensinc.com 1.9