17.07.2015 Views

Pliers

Pliers

Pliers

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ACSR (Aluminum Conductor Steel Reinforced)Wire Pulling GripsFor Cable Diameter4 AWG - 636 MCM.250" - .953" (6.35 mm - 24.21 mm)AWG or MCMCable SizeDiameterinches (mm)No. of Alum. &Steel StrandsCodeWord4,500 lbs(2041 kg)MAXIMUM SAFE LOADA B C D8,000 lbs(3629 kg)15,000 lbs(6803 kg)Cat. No. Cat. No. Cat. No. Cat. No.4 .250" (6.35 mm) 6 x 1 Swan 1656-20, 1656-20H & S1656-20H4 .257" (6.53 mm) 7 x 1 Swanate 1656-20, 1656-20H & S1656-20H2 .316" (8.03 mm) 6 x 1 Sparrow 1656-20, 1656-20H, S1656-20H,1656-30, 1656-30H & S1656-30H1628-16PE*2 .325" (8.26 mm) 7 x 1 Sparate 1656-20, 1656-20H, S1656-20H,1656-30, 1656-30H & S1656-30H1628-16PE*I .354" (9.02 mm) 6 x 1 Robin 1656-20, 1656-20H, S1656-20H,1656-30, 1656-30H & S1656-30H1628-16PF*1/0 .398" (10.11 mm) 6 x 1 Raven 1656-20, 1656-20H, S1656-20H,1656-30, 1656-30H & S1656-30H1628-16PG*2/0 .447" (11.35 mm) 6 x 1 Quail 1656-30, 1656-30H & S1656-30H 1628-16PG*3/0 .502" (12.75 mm) 6 x 1 Pigeon 1656-30, 1656-30H & S1656-30H 1628-16PH*4/0 .563" (14.30 mm) 6 x 1 Penguin 1656-40, 1656-40H& S1656-40H1628-16PI*266.8 MCM .609" (15.47 mm) 18 x 1 Waxwing 1656-40, 1656-40H &S1656-40H1628-16PJ*266.8 MCM .642" (16.31 mm) 26 x 7 Partridge 1656-40, 1656-40H &S1656-40H1628-16PK*300 MCM .680" (17.27 mm) 26 x 7 Ostrich 1656-40, 1656-40H &S1656-40H1628-16PK*336.4 MCM .684" (17.37 mm) 18 x 1 Merlin 1656-40, 1656-40H &S1656-40H1628-16PK*336.4 MCM .720" (18.31 mm) 26 x 7 Linnet 1656-40, 1656-40H &S1656-40H1628-16PL*336.4 MCM .741" (18.82 mm) 30 x 7 Oriole 1628-16PL*See facing pagefor grip details.20,000 lbs(9072 kg)397.5 MCM .743" (18.87 mm) 18 x 1 Chickadee 1656-50, 1656-50H& S1656-50H397.5 MCM .772" (19.61 mm) 24 x 7 Brant 1656-50, 1656-50H& S1656-50H397.5 MCM .783" (19.89 mm) 26 x 7 Ibis 1656-50, 1656-50H &S1656-50H397.5 MCM .806" (20.47 mm) 30 x 7 Lark 1656-50, 1656-50H &S1656-50H477 MCM .814" (20.68 mm) 18 x 1 Pelican 1656-50, 1656-50H &S1656-50H477 MCM .846" (21.49 mm) 24 x 7 Flicker 1656-50, 1656-50H &S1656-50H477 MCM .858" (21.79 mm) 26 x7 Hawk 1656-50, 1656-50H &S1656-50H556.5 MCM .879" (22.33 mm) 18 x 1 Osprey 1656-60, 1656-60H &S1656-60H477 MCM .883" (22.43 mm) 30 x 7 Hen 1656-60, 1656-60H &S1656-60H556.5 MCM .914" (23.22 mm) 24 x 7 Parakeet 1656-60, 1656-60H andS1656-60H556.5 MCM .927" (23.55 mm) 26 x 7 Dove 1656-60, 1656-60H &S1656-60H636 MCM .940" (23.88 mm) 18 x 1 Kingbird 1656-60, 1656-60H &S1656-60H556.5 MCM .953" (24.21 mm) 30 x 7 Eagle 1656-60, 1656-60H &S1656-60H605 MCM .953" (24.21 mm) 24 x7 Peacock 1656-60, 1656-60H &S1656-60H“S” is for spring. “H” is for hot latch.*Special order only. Please allow 30 days for delivery. These are not returnable.1628-16PL*1628-16PM*1628-16PM*1628-16PM*1628-16PM*1628-16PN*1628-16PN*1628-16PN*1628-16PN*1628-30N*1628-30N*1628-30N*1628-30N*1628-30O*1628-30O*1628-30O*1628-30O*1628-30O*208All dimensions are in inches and (millimeters) unless otherwise specified.WARNING: Grips are to be used for temporary installation, not forpermanent anchorage.WARNING: When used on/or near energized lines, ground,insulate, or isolate grip before pulling.WARNING: Do not exceed rated capacity.WARNING: Always match proper size and type of grip to application.WARNING: Before each use, clean jaw area and inspect grip forproper operation to avoid slippage.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!