Pliers

Introduction – Insulated ToolsThick, exceptionally tough,high-dielectric white innercoating is bonded to the tool.Forged steel handle.A flame retardant, impact-resistant,bright orange outer coating.Insulated ToolsThe line of insulated tools incorporates all the Klein qualitydesign and construction features that professionals have reliedon. The tools combine excellent functionality along with reductionof risk of injury where a tool might make contact with an energizedsource with voltage up to 1000 volts.All catalog numbers for Klein insulated tools have the suffix “INS”and are marked with the official international 1000-volt ratingsymbol. Not all tools with plastic coatings or plastic handles provideprotection against electrical shock. Only use those toolsthat are marked with the official international 1000-volt ratingsymbol, as shown, if there is any chance that the tool willmake contact with an energized source.Insulated Pliers• All Klein insulated tools comply with the IEC 60900and ASTMF 1505 standards for insulated tools, and areclearly marked with the 1000-volt rating symbol.• The large, bright orange handles make the toolcomfortable to use all day and easy to identify in the field.• The insulation on each tool consists of two layers.The high-dielectric white inner layer is a thick, exceptionallytough base coating which is bonded to the tool. The outerlayer is a flame-retardant, bright orange color.Features:WEAR YEY PROTECTIOND 2 1 3 - 9 N EN N STwo layers of insulationprovide protection againstelectric shock.Custom,US-madetool steel.Integral guards helpprevent hand contact withconductive parts.Klein insulated tools exceed the IEC60900 and ASTM F1505 standards, forinsulated tools, and are clearly markedwith the official 1000-volt rating symbol.MADE IN USA60All dimensions are in inches and (millimeters).WARNING: Only use tools that are marked with the official international1000-volt rating symbol shown below, if there is any chancethat the tools will make contact with anenergized source.WARNING: Whenever possible, always de-energize lines andequipment prior to working on or around them. Klein insulated toolsare designed only to reduce the chance of injury where the tool maymake contact with an energized source.WARNING: Do NOT touch uninsulated portion of the tool or anyconductive object when either might contact an energized source.WARNING: Wear approved eye protection. Always inspect your toolsbefore use. Do not use if orange coating cracks, breaks or becomesdamaged. Destroy tool if white layer shows through orange layer.WARNING: Because moisture, films, or other surface contaminantsare conductive, Klein insulated tools must be kept clean, dry, andfree of any surface contaminants.