Pliers

Interchangeable Jaw Grips & Liners• Constructed of high strength alloy steel, hot forged, heat treated,and galvanized for toughness, strength and corrosion resistance.• Suitable for Optical Ground Wire (OPGW) conductors .236" to .906"(6 mm - 23 mm) (Cat. No. 1628-80).• Offers a full range of interchangeable liners to be inserted betweenthe upper and lower jaws of the grip.Interchangeable Jaw Grips & Liners1628-60 1628-80Steel Construction ToolsLower liner – AluminumUpper liner – Aluminum(Cat. Nos. 1628-60, 1628-70)• Liners are made to order. Call customer service with details ofcable diameter, cable type and working load requirementsfor availability and lead time.Lower liner – Polyurethane(provides cushioning for the optical cable)Upper liner – Aluminum(Cat. No. 1628-80)Cat. No. Description Cable Diameter Range Maximum Working Load Recommended For: Weight1628-60 1628-60 grip body only .394" to 1.614" (10 mm to 41 mm) 6,750 lbs. (3060 kg.) conductor cable 38 lbs. (17 kg.)1628-70 1628-70 grip body only .236" to .906" (6 mm to 23 mm) 6,750 lbs. (3060 kg.) conductor cable 15 lbs. (7 kg.)1628-80 1628-80 OPGW grip body only .236" to .906" (6 mm to 23 mm) 6,750 lbs. (3060 kg.) OPGW 15 lbs. (7 kg.)WARNING: Grips are to be used for temporary installation, not forpermanent anchorage.WARNING: When used on/or near energized lines, ground,insulate, or isolate grip before pulling.All dimensions are in inches and (millimeters).WARNING: Do not exceed capacity.All dimensions are in inches and (millimeters) unless otherwise specified.WARNING: Always match proper size and type of gripto application.WARNING: Before each use, clean jaw area and inspect grip forproper WARNING: operation Always to avoid wear slippage. approved eye protection.223