Pliers

Insulated Stripper/CuttersInsulated Wire Stripper/CutterAdditional Features:Individually dielectrically tested.Gauges, cuts, strips, and loops wire.Spring-loaded for self-opening.Compact, lightweight wire-stripping, cutting tool.Narrow nose fits into tight places.Do not use for cutting steel wire or bolts.• Hardened spring steel with precision-ground stripping holes for easy removal of insulation.11049-INSCat.No. Overall Length Strips and Cuts Handle Color Weight (lbs.)11045-INS 7" (178 mm) 10, 12, 14, 16, 18 solid AWG (4.0 mm 2 , 2.5 mm 2 , 1.5 mm 2 , 1.0 mm 2 , 0.75 mm 2 ) orange .7011049-INS 7" (178 mm) 8, 10, 12, 14, 16 stranded AWG (6.0 mm 2 , 4.0 mm 2 , 2.5 mm 2 , 1.5 mm 2 , 1.0 mm 2 ) orange .70Insulated ToolsInsulated Wire Stripper/CutterAdditional Features:Individually tested to exceed standards.Cuts, strips, loops and gauges both solid and stranded wire.Spring-loaded for self-opening.• Serrated nose for easy bending, shapingand pulling of wire.Cleanly shears 6-32 and 8-32 scews.• Do not use for cutting steel wire.Cat.No. Overall Length Strips and Cuts Handle Color Weight (lbs.)11055-INS 8" (203 mm) 10, 12, 14, 16, 18 AWG solid12, 14, 16, 18, 20 AWG strandedorange .75®11055-INSInsulated Screwdrivers and Nut DriversFeatures:WEAR YEY PROTECTIOND 2 1 3 - 9 N EN N SKlein insulated tools exceedthe IEC 60900 and ASTM F1505standards, for insulated tools,and are clearly marked with theofficial 1000-volt rating symbol.Custom,US-madetool steel.Thick, exceptionally tough,high-dielectric white innercoating is bonded to the tool.Two layers of insulationprovide protection againstelectric shock.Bright orange outer coatingis flame and impact resistant.Patented Tip-Ident®quickly identifies nutdriver size.All dimensions are in inches and (millimeters).64All WARNING: dimensions Only are in use inches tools and that (millimeters).are marked with the official international1000-volt rating symbol shown below, if there is any chancethat WARNING: the tools will Only make use contact tools that with are an marked with the official international1000-volt source. rating symbol shown below, if there is any chanceenergizedthat the tools will make contact with anenergized source.WARNING: Wear approved eye protection. Always inspect your toolsbefore use. Do not use if orange coating cracks, breaks or becomesdamaged. WARNING: Destroy Whenever tool if white possible, layer always shows de-energize through orange lines layer. andequipment prior to working on or around them. Klein insulated toolsare designed only to reduce the chance of injury where the tool maymake WARNING: contact with Do NOT an energized use screwdrivers source. to pry or chisel.WARNING: Do NOT touch uninsulated portion of the tool or anyconductive WARNING: object Do NOT when touch either uninsulated might contact portion an energized of the tool source. or anyconductive object when either might contact an energized source.WARNING: Whenever possible, always de-energize lines andequipment WARNING: prior Wear to working approved on eye or around protection. them. Always Klein inspect insulated your tools toolsare before designed use. Do only not to use reduce if orange the coating chance cracks, of injury breaks where or the becomes tool maymake damaged. contact Destroy with tool an energized if white layer source. shows through orange layer.WARNING: Because moisture, films, or other surface contaminantsare conductive, Klein insulated tools must be kept clean, dry, andfree of any surface contaminants.