User Manual - Bever Control AS

More documents

Recommendations

Info

Bever Team 3Fig. 151.5.1 Jumbo ConfigurationsIs used for setting up export parameters to the jumbos.Fig. 16Configuration name: Name of the Jumbo/configuration.Path to media: Choose the path to the memory stick to use.Type of jumbo: Defines the data format to the jumbo.Pack/Zip: Used to Zip the project for wireless transfer of data.1.5.2 Point types: DesignThis is used to define different point types that can be used on the jumbo. These values areused in the Design Tunnel Production Data module.Fig. 17Page 18
Bever Team 31.5.3 Contour LayersHere the different layers in the contour can be defined. Layer number, name, visibility, ifcamber is to be used and color on the layers.1.5.4 Auto drill plans for Win2000 jumbosFig. 18Is used to create an automatically generated drill plans for old versions of the Bever Controlsystem on the jumbo. There is a user guide from Bever Control which can be purchased forthis feature.Fig. 191.5.5 Report: Contour surfaceUsed to create a report from the theoretical contour surface. This report is only possible withMS Visio.A typical report can be as shown in Fig.20.Page 19
Page 1 and 2: Bever Team 3User Manual
Page 3 and 4: Bever Team 3Content1 What is Bever
Page 5 and 6: Bever Team 34.9.2 Injection paramet
Page 7 and 8: Bever Team 3Bever Team 3 Main1 What
Page 9 and 10: Bever Team 34 Main screenFig. 2Main
Page 11 and 12: Bever Team 3Fig. 5Data base connect
Page 13 and 14: Bever Team 3Fig. 8Find the project
Page 15 and 16: Bever Team 3When an already existin
Page 17: Bever Team 31.1 Submit to databaseT
Page 21 and 22: Bever Team 32 The ScreenThe screen
Page 23 and 24: Bever Team 3Fig. 23The next step wi
Page 25 and 26: Bever Team 35 Sheet - TunnelsA tunn
Page 27 and 28: Bever Team 38 Sheet - VerticalThe v
Page 29 and 30: Bever Team 3Fig. 34There are severa
Page 31 and 32: Bever Team 3Production Planning1 Ov
Page 33 and 34: Bever Team 3If the Alarm is set, th
Page 35 and 36: Bever Team 3Drill plan editorFig. 4
Page 37 and 38: Bever Team 31.2 Create holes on a l
Page 39 and 40: 1.4 Read hole groupFig. 48Choose Op
Page 41 and 42: 1.6 Sequence and rotationFig. 50Cho
Page 43 and 44: 1.8 Operations in the tableTable:Fi
Page 45 and 46: 1.10 Ignitor GroupsFig. 56Choose me
Page 47 and 48: As built geometry1 OverviewThe as b
Page 49 and 50: Fig. 603 Profile log viewerThe main
Page 51 and 52: Toggle deviation: Will set the devi
Page 53 and 54: 3.1.1 SettingsFig. 66To change valu
Page 55 and 56: deviation and use that value where
Page 57 and 58: Fig. 70 shows the last sheet where
Page 59 and 60: Trench volume - The operator must d
Page 61 and 62: - .TL2 Bever Production log files-
Page 63 and 64: 2.1.2 Round ReportA report where va
Page 65 and 66: 3 TunnProduction3.1 Main ScreenFig.
Page 67 and 68: • Tool bar• Status bar• Page
Page 69 and 70:
Hole depth• Depth ref: Max, colla
Page 71 and 72:
3.4.4 Multi holeFig. 82 Multi holeG
Page 73 and 74:
3.4.6 Drillpattern 3DFig. 84 Drillp
Page 75 and 76:
3.4.8 Collar surfaceFig. 86 Collar
Page 77 and 78:
Fig. 88 PropertiesGeneral• Peg li
Page 79 and 80:
3.6 Miscellaneous3.6.1 SequenceChoo
Page 81 and 82:
Injection4 Start InjectionFig. 93 S
Page 83 and 84:
4.4 Summing upFig. 96 Summing up re
Page 85 and 86:
4.6 RecipesFig. 98 Recipe reportThe
Page 87 and 88:
4.8 Diagram Flow PressureFig. 100 D
Page 89 and 90:
4.9.2.1 Injection Amount and Pressu
Page 91 and 92:
4.9.4 Drill plan view ColumnFig. 10
Page 93 and 94:
4.11.2 Setting cement parametersFig
Page 95 and 96:
4.11.6 Setting GeneralFig. 112 Sett
Page 97 and 98:
4.12.4 AmountFig. 116 AmountFor the
Page 99 and 100:
Also existing drill information can
Page 101 and 102:
4.15.2 RecipesFig. 123 RecipesA rec
Page 103 and 104:
Bever Team 3MWDThe Bever Control MW
Page 105 and 106:
Bever Team 3Right click with the mo
Page 107 and 108:
Bever Team 3endsremoval of the nois
Page 109 and 110:
Bever Team 3All the desired hole ty
Page 111 and 112:
Bever Team 3It is very important th
Page 113 and 114:
Bever Team 31-08 Hole diameter Hole
Page 115 and 116:
Bever Team 3Penetration rate is the
Page 117 and 118:
Bever Team 3Injection drilling 20 m
Page 119 and 120:
Bever Team 3Program Files and Folde
show all

User Manual - Bever Control AS

Create successful ePaper yourself

Delete template?

Save as template?