Conveying with ease Fitting and operational manual Declaration of ...

Contents
Page
1 General ··································································· 2
2 Safety ······································································ 3
2.1 Proper usage ··························································· 3
2.2 General safety instructions ······································· 3
2.3 Operational conditions ············································· 3
3 Outline ···································································· 4
3.1 Principle/structure ···················································· 4
3.2 Main body/technical details ····································· 4
3.3 Types/included with product ···································· 4
3.4 Storage ··································································· 5
4 Assembly ································································· 6
4.1 Assembly instructions ·············································· 6
4.2 Assembly tolerances ················································ 6
4.3 Retrofi tting procedure ············································· 7
1 General
All these instructions have been drawn up exclusively by
assembly, operational and maintenance personnel that are
technically qualifi ed. Please read these instructions carefully
before fi tting the deniroll ® curve support and commissioning
the conveyor in question. This document includes safety
instructions.
The specifi cations in the order confi rmation list the exact
technical data on the deniroll ® curve support you have been
supplied with.
The assembly of the deniroll ® curve support is the same for
all conveying angles and widths. The size shown in the fi gures
(curve angle 90°) was only selected to make the drawing
easier to understand.
5 Operation ································································ 8
5.1 Commissioning/recommissioning ····························· 8
5.2 Shutting down ························································ 8
5.3 Disposal ··································································· 8
6 Maintenance/cleaning ············································· 8
6.1 Maintenance ··························································· 8
6.2 Cleaning ·································································· 8
7 Repair ······································································ 9
7.1 Exchanging the roller belt in curve supports
with insertion opening ············································· 9
7.2 Exchanging the roller belt in curve supports
without insertion opening ······································ 10
8 Declaration of incorporation
for incomplete machinery ······································· 11
Important instructions in the text appear as follows:
Comment
In this case, the user must respect unusual technical features.
Attention
In this case, working procedures must be adhered to precisely
to avoid damaging the machinery.
Caution
In this case, working procedures must be adhered to precisely
to exclude the possibility of damaging the machinery and/or
putting the user or other persons at risk.
bmaKA_V1_E_2009.09_1000
2