Conveying with ease Fitting and operational manual Declaration of ...

3 Outline
3.1 Principle/structure
The deniroll ® curve support is a roller component to provide
horizontal support to the inner curve in curved modular
belts (fi g. 3.1.1). The rotating rollers are contained in a roller
belt (3) that is guided in both guidance plates (1 and 2) in a
groove (5) (fi g. 3.1.2). The structure shown is an example and
the design can be different, while the principle of how it
works is the same.
The support can be retrofi tted in existing conveyors.
➍
Fig. 3.1.2
b K
➋
➌
➊
➎
u K
Fig. 3.2 – view from the middle of the curve
α
r M
r K
Fig. 3.1.1 – view of the inner radius of the curve
1 Bottom of guidance plate with guidance groove (5)
2 Top of guidance plate
3 Roller belt with rollers
4 Connecting screws
3.2 Main body/technical details
α curve angle (specifi c to order)
r curve radius K (specifi c to order =
inner radius of the modular belt)
r assembly radius M (r – 30 mm;
K
assembly drill holes specifi c to
order M6 or M8)
b width K 56 mm
u length of the curve protrusion (specifi c to order)
K
Main body of the deniroll ® curve support which is specifi c to
the order concerned is stated in the order confi rmation from
denipro.
bmaKA_V1_E_2009.09_1000
4