P-Bus Gateway Firmware PBGW2.128 Version 1.61
P-Bus Gateway Firmware PBGW2.128 Version 1.61 - Persy
P-Bus Gateway Firmware PBGW2.128 Version 1.61 - Persy
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
General<br />
The gateway is being configured by means of a web interface (HTML). Use a<br />
standard web browser ie. MSIE5.5 or higher.<br />
If you have more than one PC, you must use an external hub. Connect the<br />
Ethernet port on the gateway (X6) to a port on the hub using a straight through<br />
Ethernet cable. If you only have one PC, you can connect the gateway to the PC<br />
directly without a hub. For a single PC, connect the Ethernet port on the gateway<br />
(X6) to the Network Adapter on the PC using a crossover cable (red tag).<br />
Make sure that the PC is configured in the same subnet as the gateway is.<br />
Go to the Network Connections of your PC from the Control Panel.<br />
Make sure the LAN connection to which the gateway is connected is disabled. If<br />
not, right click on the LAN connection and choose ‘disable’.<br />
Now, right click on the LAN connection and choose ‘properties’.<br />
In the next window select Internet Protocol (TCP/IP) and click ‘Properties’.<br />
2/17<br />
Persy Control Services B.V.<br />
Netherlands<br />
<strong>PBGW2.128</strong> – P-bus <strong>Gateway</strong><br />
PCS0113en<br />
02.2009