Smart Kit catalogue (En)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PREAMPLIFIERS-MIXERS<br />
1010<br />
1023<br />
1024<br />
5-INPUTS STEREO MIXER<br />
A 5-input mixer with professional specifications.<br />
Suitable for DISCOS, Hi-Fi systems, FM transmitters<br />
etc. It uses professional sliding potentiometers to<br />
control the input levels. It has 2 PICK-UP inputs, 2<br />
TAPE or TUNER and a MICROPHONE input and also<br />
features a MONITOR output. Freq. response: 20Hz-<br />
15KHz (-3dB). Distortion: 0.05%..Output: 1V/47KOhm.<br />
Sensitivity: MIC 2mV, P.U. 3mV,TAPE or TUNER 150<br />
mV.<br />
DYNAMIC HEAD PREAMPLIFIER - RIAA<br />
A circuit specially designed for moving magnet PICK-<br />
UP heads. It incorporates RIAA equalisation and is of<br />
course STEREO. It can be combined with SMART KIT<br />
1032 (Stereo tone controls) to form the base of a Hi-<br />
Fi system. Sensitivity: 2-5mV. Output level: 150mV. Input<br />
impedance: 47 KOhm. Frequency response: 20Hz-<br />
20KHz.<br />
SUITABLE BOX 2023 ASSEMBLED UNIT 5023<br />
MICROPHONE PREAMPLIFIER<br />
A MICRO preamplifier suitable for dynamic,<br />
electrostatic and electret (condenser) microphones.<br />
Very useful for transmitters, DISCOS, P.A. systems etc.<br />
It will work very well with the SMART KIT 1052, (3<br />
input mixer). Frequency response: 50Hz-15KHz.<br />
Distortion: 0.5%.<br />
V 12 VDC<br />
P.S. 1061<br />
T<br />
PCB 165x220mm<br />
CE<br />
V 18-24 VDC<br />
P.S. 1068<br />
T<br />
PCB 60x60mm<br />
CE<br />
V 9-20 VDC<br />
P.S. 1061<br />
T<br />
PCB 40x45mm<br />
1050<br />
3-INPUTs Hi-Fi PREAMPLIFIER<br />
This is a complete STEREO preamplifier with tone<br />
controls, dynamic head stage with RIAA correction<br />
(3mV sensitivity),TAPE OUT (150mV),AUX input (200<br />
mV) and TAPE IN (200 mV). It also has a SCRATCH<br />
filter and a MONO-STEREO switch.The switches are<br />
push-button type and are incorporated in the printed<br />
circuit board. It can be used with any power amplifier.<br />
Very good value for money. Frequency response: 15Hz<br />
-30KHz. Output voltage: 1.5 V<br />
16 Internet site: http://www.smartkit.gr<br />
V<br />
P.S.<br />
T<br />
24 VDC<br />
PCB 72x275mm