02.03.2016 Views

Smart Kit catalogue (En)

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

1059<br />

1078<br />

1119<br />

1122<br />

TELEPHONE<br />

TELEPHONE AMPLIFIER<br />

A very sensitive amplifier that will amplify the voice<br />

through a telephone pick-up coil (included in the kit)<br />

and will let you follow a telephone conversation<br />

without having to hold the telephone receiver in your<br />

ear. It is also very useful when more than one person<br />

have to listen to what is said on the phone. Power out:<br />

1W. Max. current: 120mA.<br />

SUITABLE BOX 2059<br />

PROTECTION FROM MALICIOUS CALLS<br />

A simple and useful circuit that will ensure your<br />

protection from malicious calls, with an easy and<br />

certain way that you are able to change at any<br />

moment.The heart of the circuit is the PIC<br />

microproccessor 16C56, that cuts off the first rings<br />

(adjustable from 3 to 12), thereby the caller will hang<br />

up thinking that you’re absent.You are going to hear<br />

the call after the rings that you chose to cut off.<br />

TELEPHONE LINE RECORDING<br />

A very clever device that will activate a cassette<br />

recorder when the telephone receiver is lifted. It is<br />

very useful for the recording of commercial orders<br />

over the telephone, conversations, security etc. It<br />

draws its power from the remote control line of the<br />

cassette recorder, which should be a model which<br />

works off at least 6VDC.<br />

SUITABLE BOX 2119<br />

TELEPHONE CALL RELAY<br />

A simple device that can be used to give a signal or to<br />

V<br />

operate an electrical apparatus every time the<br />

telephone rings.Very useful for noisy places, where a<br />

P.S.<br />

light signal or a siren can draw the attention to the<br />

phone better than the telephone bell, or for cases<br />

T<br />

where the telephone is in such a place that cannot be<br />

heard and you need a secondary bell. It does not<br />

PCB 64x64mm<br />

require any power supply and the relay contacts are<br />

rated at 250V/2A.<br />

SUITABLE BOX 2122<br />

☎<br />

32 Internet site: http://www.smartkit.gr<br />

V<br />

CE<br />

9-12VDC<br />

P.S. 1061<br />

T<br />

PCB<br />

V<br />

43x69mm<br />

9-12VDC<br />

P.S. 1061<br />

T<br />

PCB<br />

V<br />

P.S.<br />

T<br />

PCB<br />

☎<br />

65x105mm<br />

☎<br />

CE<br />

40x56mm<br />

☎<br />

CE

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!