Smart Kit catalogue (En)

POWER SUPPLIES
1096
STABILISED POWER SUPPLY 2-30VDC/5A CE
An easy to build, powerful, stabilised power supply with
variable output voltage from 2 to 30 Volts and a
maximum power rating of 5A. It covers almost all the
voltages needed in the electronic laboratory.The kit
comes complete with a large heatsink for the power
transistors. It uses the well known LM317 voltage
regulator. Output voltage: 2-30V Max. current: 5A.
SUITABLE BOX 2096
NEW DESIGN
V 24 VAC
P.S.
T 24VAC/5A
PCB 77x150mm
1138
STABILISED POWER SUPPLY 0-30VDC/3A
An easy to build, powerful, stabilised power supply with
variable output voltage from 0 to 30 Volts and a
maximum power rating of 3A. It covers almost all the
voltages needed in the electronic laboratory.The kit
comes complete with a large heatsink for the power
transistor. It uses three op-amps and four transistors.
V
P.S.
T
PCB
24 VAC
24VAC/3A
85x123mm
SUITABLE BOX 2138
1169
POWER SUPPLY 3- 4.5-6- 9-12VDC / 1.5A CE
This is a universal stabilised power supply. Depending
on the transformer that is used in the input it gives the
related DC output at a power rating of up to 1.5A. It
can be used as power supply for many electronic
devices such as radios, tape recorders, portable TV sets
etc.
NEW DESIGN
V 12 VAC
P.S.
T 12VAC/1,5A
PCB 85x123mm
1171
RFI POWER SUPPLY 12-14V/3A
The RF devices (transmitters, receivers) demand special
power supplies in order to avoid many serious
problems (noise, overheating, standing waves, e.t.c.).
This power supply does not permit the passing of high
frequencies and delivers a voltage of 12-14VDC and a
current of 3A.The circuit includes thermal protection,
short circuit protection and electronic stabilisation.
V
P.S.
T
PCB
CE
18 VAC
18VAC/3A
72x82mm
46 Internet site: http://www.smartkit.gr