Smart Kit catalogue (En)

POWER SUPPLIES
1007
1056
POWER SUPPLY 3-30V/2.5A
This is a variable, stabilised power supply for
laboratory use. It is very reliable and therefore suitable
for professional or amateur applications. No laboratory
should be without one! It is short circuit protected and
the kit comes complete with a large heatsink. It uses
the well known VOLTAGE REGULATOR IC LM-723
and two transistors.
SUITABLE BOX 2007
STABILISED POWER SUPPLY 8-20V 8A
A heavy duty power supply capable of powering even
the most power demanding circuits in your laboratory
with pure, clean, stable DC current. Up to 150 Watts
output power.The circuit incorporates special
protection filters against RF from transmitters and
LINEAR amplifiers, making it ideal for such applications.
The ideal power supply for SMART KITs 1021, 1031
and 1017.The kit comes complete with heatsinks.
V
P.S.
T
PCB
V
P.S.
T
PCB
24 VAC
24VAC/3A
55x112mm
24 VAC
24VAC/8A
67x155mm
1060
POWER SUPPLY ±40V/8A
The ideal power supply for amplifiers like SMART KIT
1033 or 1077. If the amplifier is used for a MONO
system, a 2x28VAC/4A transformer is sufficient. If you
plan to supply a stereo amplifier, the transformer
should have an 8A rating.
V
P.S.
T
PCB
CE
2x28 VAC
2x28VAC/8A
44x69mm
1061
STABILISED POWER SUPPLY 12V 0.5A
One of the most popular power supplies in our range
of kits. It only requires a 12VAC 0.5A transformer. It
uses a 7812 VOLTAGE REGULATOR IC. It is the ideal
power supply for SMART KITs 1002, 1004, 1005, 1009,
1012, 1013, 1016, 1020, 1025, 1026, 1035, 1039, 1042,
1048, 1049, 1055, 1057, 1059, 1067, 1070, 1071, 1080,
1083, 1084, 1112, 1116, 1124, and for any other
application where you may need a stabilised 12VDC
voltage of up to 500mA.
V
P.S.
T
PCB
12 VAC
12VAC/0,5A
36x75mm
44 Internet site: http://www.smartkit.gr
CE