Smart Kit catalogue (En)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1110<br />
INSTRUMENTS<br />
OSCILLOSCOPE COMPONENT TESTER<br />
With this circuit you will be able to increase the<br />
testing possibilities of your oscilloscope with a feature<br />
found only in the most expensive models of the<br />
market. Using this circuit you will be able to test all the<br />
electronic components like: Diodes, Zeners,Transistors,<br />
Capacitors, Coils etc.The size of the board is small<br />
enough to fit easily in the case of any oscilloscope.The<br />
kit comes complete with the mains transformer.<br />
V<br />
P.S.<br />
T<br />
PCB<br />
8VAC<br />
8VAC/IA<br />
40x44mm<br />
1111<br />
LOGIC PROBE<br />
A must for those who work with digital circuits. It will<br />
detect and display logic states of “1” and “0” by lighting<br />
respective LEDs and will also give an indication with a<br />
third LED if it detects a pulse train. Suitable for TTL<br />
and CMOS circuits. Max. current: 20mA.<br />
V<br />
P.S.<br />
T<br />
PCB<br />
CE<br />
9VDC H<br />
20x80mm<br />
1116<br />
SIGNAL INJECTOR - SIGNAL TRACER<br />
A very useful instrument for those who work in<br />
electronics, professionals and amateurs alike. It is<br />
indispensable for the checking of amplifiers,<br />
preamplifiers, receivers and other electronic circuits. It<br />
is easy to use and can also be used as a continuity<br />
tester, for the testing of cables, PCB tracks etc. Max.<br />
Current: 50mA.<br />
V<br />
P.S.<br />
T<br />
PCB<br />
9VDC H<br />
40x91mm<br />
1137<br />
DIGITAL VOLTMETER WITH LED DISPLAYS<br />
A digital panel meter with four led displays for your<br />
laboratory. It uses the well known ICL 7106 analogue<br />
to digital converter IC.This integrated circuit<br />
incorporates in a 40 pin package all the circuitry<br />
necessary to translate an analogue quantity as voltage<br />
to digital information and also has the necessary driver<br />
circuit for the four led displays. Current drawn 200mA<br />
max. Measuring range: 0-200 Volts .<br />
V<br />
P.S.<br />
T<br />
PCB<br />
±5VDC<br />
45x83mm<br />
38 Internet site: http://www.smartkit.gr