Smart Kit catalogue (En)

PREAMPLIFIERS-MIXERS
1071
4-INPUTs SELECTOR FOR 1070
A circuit designed to complement the SMART KIT
1070 using the same DC control technology and
compatible input and output levels with the 1070. It
incorporates a moving magnet preamplifier stage with
RIAA equalisation. It can switch up to 4 inputs (P.U.,
TUNER,AUX and TAPE) and also incorporates a TAPE
OUT for recordings. Current 30mA. Frequency
response: 5Hz-22KHz.
V 12 VDC
P.S. 1061
T
PCB 68x130mm
1126
3 MICROPHONE INPUTS PREAMPLIFIER
A preamplifier for microphones equipped with BASS,
TREBLE and VOLUME controls. Used together with
SMART KIT 1127 it can form a complete microphone
mixer of professional quality. Input sensitivity: 2.5-
300mV. Max. current: 50mA.
V
P.S.
T
PCB
30 VDC
49x112mm
1127
TONE CONTROLS FOR 1126
This is the MASTER unit that in combination with one
or more SMART KIT 1126 units can form a complete
MICROPHONE MIXER CONSOLE with individual and
master controls. It has MASTER BASS,TREBLE and
VOLUME controls. Max. current: 50mA. Input
sensitivity: 2.5-300mV.
V
P.S.
T
PCB
30 VDC
46x100mm
1166
SUPER RIAA PREAMPLIFIER
With the spreading of the CD players, many
manufacturers of amplifiers and mini sound systems
have a tendency to remove the phono input from their
products.As a result, the old but good pick ups cannot
operate with these machines, and many LP collections
remain useless.The problem can be solved the best
way using this application.The circuit is based on the
special and supplemented circuit LM833 that ensures
low noise, high sound quality and reliability,
consumption 70mA.
18 Internet site: http://www.smartkit.gr
V
P.S.
T
2x15 VAC
2x15VAC/0,5A
PCB 83x91mm