Smart Kit catalogue (En)

1008
INSTRUMENTS
AF FUNCTION GENERATOR
An audio frequency function generator capable of
covering the frequency range between 20 Hz and 20
KHz. It produces sinusoidal, triangular (sawtooth) and
square waveforms. It can be used very well for
accurate adjustments in the laboratory. It has separate
level controls for each waveform shape and it can be
easily set to give exactly the same signal level for each
waveform at the same time.
V
P.S.
T
PCB
CE
24VAC
24VAC/IA
65x120mm
1036
TRANSISTOR TESTER
This is a circuit that will help you sort the
TRANSISTORS you have in your laboratory, and will
also help you choose the best of them for your
projects. It will also show you if the TRANSISTOR is
PNP or NPN.The circuit can also be used to check
some types of diodes.The printed circuit board is small
and if you use a small box to put it in you will have a
convenient and portable TRANSISTOR tester.
SUITABLE BOX 2036
V
P.S.
T
PCB
CE
9VDC H
35x43mm
1042
AF GENERATOR 250Hz - 16KHz
An economical signal generator that will produce a
square wave of up to 15 Volts amplitude.A very good
solution for the amateur’s lab.The frequency can be
varied between 250Hz and 16KHz. Building the kit is
very simple and the setting up is very easy.
Max.current: 50mA.
CE
V 5-15VDC
P.S. 1061
T
PCB 35x44mm
1087
THYRISTOR - TRIAC TESTER
This simple circuit proves itself as one of the most
useful additions to your bench gear, as it will test
accurately THYRISTORs and TRIACs, by opening and
closing their gates and, at the same time, checking for
open and short circuits. No amateur or professional
laboratory should be without one. Max. current: 10mA.
CE
V 9VDC H
P.S.
T
PCB 43x54mm
SUITABLE BOX 2087
36 Internet site: http://www.smartkit.gr