Gesamtkatalog 2016-2

12X (SFF-8470) PDA
Meritec’s new Printed Direct Attach (PDA) is in addition to Meritec’s original “Direct Attach” 12X/4X line of
InfiniBand cables and is also a more cost effective solution. While the Direct Attach line provided superior
performance when compared to all other industry standard offerings, the PDA line meets or exceeds the same
rigorous industry standards at a more than competitive price. The signal conductors in the cable are directly
attached to the printed circuit board which then becomes direct interface with the contacts in the board receptacle.
FEATURES | BENEFITS
• Available in 24, 26, 28 and 30 AWG
• Optional connectors are available
• Durable SFF-8470 Receptacles
• Supports data rates in excess of
6.0 Gb/s
• Meets or exceeds SAS, InfiniBand,
Ethernet CX4 and SATA specs
• Matched impedance design of 100
Ohm +/- 10%
• Mated cycles – 250 minimum
• Fully electrically tested
• Available lengths built to order
• A cost effective, industry
compliant solution
SPECIFICATIONS
ELECTRICAL:
• Impedance: 100+/- ohms differential
at 100 psec risetime
• Crosstalk: (NEXT) 4% at 100ps
(multiple aggressors)
• Insertion Loss: 1M 28awg cable –
1.3dB @ 1.5GHz connectors –
0.8dB per pair at 1.5GHz
• Skew: