Gesamtkatalog 2016-2

Hermaphroditic Connectors
The Hermaphroditic Connector has a dual wipe contact design that was developed for use in severe
environments. Shallow entry angles on the contacts ensure a smooth insertion force profile, great for high-mating
cycle applications.
FEATURES | BENEFITS
• Close pitch .050” centers minimize
board space requirements
• 50 ohm impedance matched connector
• Hermaphroditic contacts eliminate the
need for separate male and female
connectors
• Designed to meet convection, IR or
vapor phase reflow requirements
• Through-hole and SMT contact tail end
configurations are available
• Precision, high strength insert molded
contacts provide reliability in critical
applications
• Available with locating and mounting
features
• Designed with polarization features
• RoHS Compliant (available)
SPECIFICATIONS
ELECTRICAL:
• Current rating: .75 amp/contact
(continuous)
• Contact resistance: 5 milliohm (maximum)
• Dielectric withstanding voltage: >1000
VAC (RMS) at sea level
• Insulation resistance: >5 x 10 12 ohms at
500 VDC
MECHANICAL:
• Contact Material: Copper Alloy
• Plating, mating end: Selectively plated
contact surface consisting of 30 micro”
gold (min), over 50 micro” nickel (min)
• Insertion force: 42 grams/contact (nominal)
• Withdrawal force: 22 grams/contact (nominal)
• Normal force: 100 grams/contact (nominal)
• Shock and Vibration: MIL standard 1344
(method 2004 and 2005)
• Dielectric material: Liquid crystal polymer
resin
ENVIRONMENTAL:
• Material: UL 94 V-0 rated
• Operating temperature: -40ºC to 105ºC
A P Products GmbH, Bäumlesweg 21 – 23, 71093 Weil im Schönbuch, Germany
Tel: +49-7157-5348-0, Fax: +49-7157-5348-39, Web: www.ap-products.de, E-mail: info@ap-products.de