Gesamtkatalog 2016-2

A P Products
2,54 mm Male Headers
Series 318L
5mm
2,5mm
8 mm
(Typ.)
2,5mm
2,5mm
A
1,5mm
B
Ordering Information
9x8xxx-xx-xx-xx
Product Option: 1 Row Plating Options: Contact Quantity per Row Plating Suffix
3 = High Temperature Product 700 = Solder Plating 1 to 36 none = Standard Product
without Kinked Tail 705 = Selective Gold / Solder plating 10 = 0,25 µm sel. Au Plating
705 = all over Gold plating SnPb30 Solder Tails
K = High Temperature Product 15 = 0,25 µm sel. Au Plating
with Kinked Tail as 2 Row Plating Options: Pin Length Identifier with Sn100 Solder Tails
Board Retention Feature 710 = Solder Plating Please see table below 20 = 0,50 µm sel. Au Plating
715 = Selective Gold / Solder plating SnPb30 Solder Tails
715 = all over Gold plating 25 = 0,76 µm sel. Au Plating
with Sn100 Solder Tails
30 = 0,76 µm sel. Au Plating
SnPb30 Solder Tails
35 = 0,76 µm sel. Au Plating
Sn100 Solder Tails
50 = Sn100 Solder Plating
Pin Length Identifier Table:
Indicator Dimension
A (Ref.)
Dimension
B (Solder Tail)
Dimension
Interface
01 13,41 mm 2,91 mm 8,00 mm
11 13,84 mm 3,34 mm 8,00 mm
09 14,20 mm 3,70 mm 8,00 mm
10 15,00 mm 4,50 mm 8,00 mm
02 15,82 mm 5,32 mm 8,00 mm
08 18,40 mm 7,90 mm 8,00 mm
03 20,90 mm 10,40 mm 8,00 mm
04 23,50 mm 13,00 mm 8,00 mm
05 26,00 mm 15,50 mm 8,00 mm
06 28,60 mm 18,10 mm 8,00 mm
Engineering Note:
The information presented in this
datasheet is accurate to the best of
our knowledge.
Due to ongoing efforts to advance
design and material performance,
this information is subject to change
without notice.
A P Products GmbH, Bäumlesweg 21 – 23, 71093 Weil im Schönbuch, Germany
Tel: +49-7157-5348-0, Fax: +49-7157-5348-39, Web: www.ap-products.de, E-mail: info@ap-products.de
28/09/2012 15.11.00