Gesamtkatalog 2016-2

More documents

Recommendations

Info

Standard Cable Selection Guide Cable Style Numbers STYLE # IMPEDANCE CONSTRUCTION CONDUCTOR DIELECTRIC SHIELD PROPAGATION WIRE SIZE DC RESISTANCE MAXIMUM JACKET JACKET NOMINAL (OHMS) INSULATOR DELAY NS/FT (AWG SOLID MAX. (OHMS/ SKEW MATERIAL COLOR O.D. (±10%) OR STRANDED) [1000 FT] BETWEEN 20°C) CONDUCTORS 21 50 Coax Silver Low Aluminum/ 1.20 30 103.7 N/A FEP Blue .054 ±10 Plated Density Polyester ± .03 AWG ± .004 Copper Extruded w/drain Solid TFE 05 50 Braided Silver Low TPC 1.20 26 37.3 N/A FEP Yellow .073 ±2 Coax Plated Density Braid ± .03 AWG ± .003 Copper Extruded 7 x 34 TFE 09 50 RG-178 Silver Solid SPC 1.46 30 96.1 N/A FEP Tan .071 ±2 Braided Plated PTFE Braid ± .03 AWG ± .004 Coax Copper 7 x 38 Covered Steel 22 75 Coax Silver Low Aluminum/ 1.20 32 162.1 N/A FEP Green .058 ±10 Plated Density Polyester ± .03 AWG ± .004 Copper Extruded w/drain Solid TFE 06 75 Braided Silver Low TPC 1.20 30 96.1 N/A FEP Green .074 ±5 Coax Plated Density Braid ± .03 AWG ± .003 Copper Extruded 7 x 38 TFE 23 90 Coax Silver Low Aluminum/ 1.20 33 205.7 N/A FEP Orange .064 ±10 Plated Density Polyester ± .03 AWG ± .004 Copper Extruded w/drain Solid TFE 24 100 Coax Silver Low Aluminum/ 1.20 33 205.7 N/A FEP Red .070 ±10 Plated Density Polyester ± .03 AWG ± .004 Copper Extruded w/drain Solid TFE 34 100 Twin Silver Low Aluminum/ 1.20 30 96.1 .010 PVC Blue .056/ ±10 Coax Plated Density Polyester ± .03 AWG ns/ft .076 Copper Extruded w/drain 7 x 38 TFE 42 100 Jacketed Silver Extruded N/A 1.43 26 37.3 N/A FEP Red .066 ±10 Twisted Plated PTFE ± .05 AWG ± .008 Pair Copper 7 x 34 43 100 Shielded Silver Low Aluminum/ 1.25 30 96.1 N/A PVC Black .092 ±10 Jacketed Plated Density Polyester ± .05 AWG ± .004 Twisted Copper PTFE w/drain 7 x 38 Pair Standard Length Tolerance Under 36”: ±0.5” 36” - 120”: ±1.0” Over 120”: ±2.0” A P Products GmbH, Bäumlesweg 21 – 23, 71093 Weil im Schönbuch, Germany Tel: +49-7157-5348-0, Fax: +49-7157-5348-39, Web: www.ap-products.de, E-mail: info@ap-products.de
Specifications Electrical Current rating: Contact resistance: Dielectric withstanding voltage: Insulation resistance: Insulation resistance (BNCs only): Nominal impedance (BNCs only): 1.0 amp/contact (continuous) 10 milliohm (maximum) 300 VRMS (minimum) @ 60 Hz >1 x 10 9 ohms @ 500 VDC 500 megaohms (minimum) 50 ohms and 75 ohms Mechanical — Socket Interconnects/Single Signal Carrier Systems Pin insertion depth: .160” (min.) to .340” (max.). May vary depending on header style used. .250” (max.) for low profile configuration. Insertion force: 245 grams/contact (nominal) Withdrawal force: 145 grams/contact (nominal) Normal force: 180 grams/contact (nominal) Mechanical — PCB Soldertail Interconnects Pin length: .110” or .160” Mating device: .100” x .100” plated through hole pattern (.035” diameter ±.003” finished hole size) Environmental Temperature rating: Materials: -40°C to +105°C UL rated 94 V-O A P Products GmbH, Bäumlesweg 21 – 23, 71093 Weil im Schönbuch, Germany Tel: +49-7157-5348-0, Fax: +49-7157-5348-39, Web: www.ap-products.de, E-mail: info@ap-products.de
Page 1 and 2:
A P Products Product Overview 2016
Page 3 and 4:
LINECARD A P Products Male Header w
Page 5 and 6:
A P Products Datasheets Table of Co
Page 7 and 8:
A P Products 2,54 mm Male Headers S
Page 9 and 10:
A P Products 2,54 mm Female Headers
Page 11 and 12:
A P Products GmbH 2,54 mm Male Head
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
A P Products 6 mm (Typ.) 2,54 mm Ma
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
A P Products 2,54 mm Male Heades Se
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
A P Products 8 mm (Typ.) 2,54 mm Ma
Page 51 and 52:
Page 53 and 54:
A P Products 2,54 mm Male Headers B
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
A P Products Notes A P Products Gmb
Page 61 and 62:
A P Products GmbH Custom Header Des
Page 63 and 64:
A P Products Contact Pins Series 0,
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
A P Products Standard Layout: 2,00
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
A P Products Single Row: 2,00 mm Ma
Page 85 and 86:
A P Products 2,00 mm Male Headers T
Page 87 and 88:
Page 89 and 90:
A P Products Standard Layout: 2,00
Page 91 and 92:
Page 93 and 94:
A P Products Short Interface Side:
Page 95 and 96:
A P Products Short Interface Side:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
A P Products High Profile Body: 1,2
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
A P Products GmbH 1,27 mm Straight
Page 115 and 116:
A P Products GmbH 1,27 mm Right Ang
Page 117 and 118:
A P Products GmbH 1,27 mm Surface M
Page 119 and 120:
Page 121 and 122:
A P Products GmbH 1,27 mm Straight
Page 123 and 124:
A P Products GmbH 1,27 mm Right Ang
Page 125 and 126:
A P Products GmbH Version LP 1,27 m
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
SURFACE MOUNT SOCKET 0.50 mm TSOP A
Page 133 and 134:
SURFACE MOUNT SOCKET 1.27 mm PSOP A
Page 135 and 136:
2mm HPM Series Three Unique 2mm Des
Page 137 and 138:
2mm HPM Series Pin Assignment Matin
Page 139 and 140:
2mm HPM Series 1 2 3 4 Z Pin Assign
Page 141 and 142:
Custom Applications and Designs 2mm
Page 143 and 144:
Application Notes 2mm HPM PSeries a
Page 145 and 146:
2mm HPM Series 2mm Shrouds and Latc
Page 147 and 148:
A P Products GmbH, Bäumlesweg 21 -
Page 149 and 150:
Flat Flex Cable FEATURES and BENEFI
Page 151 and 152:
FFC Product Line Options EMI Suppre
Page 153 and 154:
FFC Product Line Pinouts and Orient
Page 155 and 156:
Micro Cable to Board Assemblies Wit
Page 157 and 158:
Controlled Impedance Multi Signal I
Page 159 and 160:
DS3 Mutli-Position w/ 740 Style Coa
Page 161 and 162:
DS3 Multi-Position w/ 735 Style Coa
Page 163 and 164:
Introducing Meritec’s Hercules ®
Page 165 and 166:
Protocols Accommodated A pp l ic a
Page 167 and 168:
Shell Size 13 (3 lane) 6 | 6 spares
Page 169 and 170:
Size 17 Receptacles ROW A Pigtail R
Page 171 and 172:
Size 23 Receptacles ROW Pigtail Rec
Page 173 and 174:
Application Notes 38999 Board Mount
Page 175 and 176:
Application Notes Size 17 & 23 PCB
Page 177 and 178:
Part # Scheme 9851 Cabled Receptacl
Page 179 and 180:
Accessories 98532 Plug Protective C
Page 181 and 182:
Excerpt from Report #886 Signal Int
Page 183 and 184: Excerpt from Report #886 Signal Int
Page 185 and 186: HERCULES ® Board-Interface System
Page 187 and 188: 4X (S FF-8470) Interface embedded w
Page 189 and 190: 4X (SFF-8470) Interface embedded wi
Page 191 and 192: 4X (SFF-8470) PDA SLIDE LATCH CABLE
Page 193 and 194: 12X (SFF-8470) PDA SLIDE LATCH CABL
Page 195 and 196: SOLDER POST ATTACHMENT SFF-8473 4X
Page 197 and 198: SFF-8473 4X Board Mount Receptacle
Page 199 and 200: SCREW ATTACHMENT SFF-8473 12X Board
Page 201 and 202: NX+ EMI Shield OPTIONAL 4x EMI Shie
Page 203 and 204: PCI Connectors and Card Edge Connec
Page 205 and 206: Right Angle 3.3V and 5V/32 Bit PCI
Page 207 and 208: 2 x 25 Right Angle Card Edge Connec
Page 209 and 210: ZIF PCI TEST CONNECTOR 4.35 .650 1.
Page 211 and 212: PCI Express 100 Ohm Right Angle Thr
Page 213 and 214: PCI Express 85 Ohm Right Angle Thro
Page 215 and 216: Card Edge Connector (Side-entry) .0
Page 217 and 218: Hermaphroditic Connectors The Herma
Page 219 and 220: 480 Position Hermaphroditic Mezzani
Page 221 and 222: HERMES Connector System Male Straig
Page 223 and 224: HERMES Connector System Right Angle
Page 225: A P Products Datasheets Table of Co
Page 229 and 230: 012345678594 5439267279 01234567859
Page 231 and 232: Single Signal Carrier Systems (SSC)
Page 233: BNC Interconnects 50 OHM BNC TERMIN
Page 237 and 238: Electrical Test Data (continued) Im
Page 240 and 241: 989 58 5**47& 56'8)54*4&)6+ 005 176
Page 242 and 243: A P Products Notes A P Products Gmb
Page 244 and 245: A P Products Elastomer Goldwire/Ela
Page 246 and 247: A P Products Notes A P Products Gmb
Page 248: A P Products Notes A P Products Gmb
show all

Gesamtkatalog 2016-2

Create successful ePaper yourself

Delete template?

Save as template?