Gesamtkatalog 2016-2

A P Products
2,54 mm Male Headers
Board Stack
Ordering Information (Continued)
Board Stack Headers with 2 Bodies
Interface / Solder Side Dual Solder Sides Dual Interface sides
Style 2A Style 2B Style 2C Style 2D Style 2E Style 2F
Board Stack Headers with 3 Bodies
Interface / Solder Side Dual Solder Sides Dual Interface sides
Style 3A Style 3B Style 3C Style 3D Style 3E Style 3F
Custom Board Stacking Headers are custom made to order. For a quote please provide a sketch and required
quantities.
Header Style:
Interface/Solder Side Dual Solder Side Dual Interface Side
Style 1A (1 row, 1 body)
Style 1B (2 row, 1 body)
Style 2A (1 row, 2 bodies) Style 2C (1 row, 2 bodies) Style 2E (1 row, 2 bodies)
Style 2B (2 row, 2 bodies) Style 2D (2 row, 2 bodies) Style 2F (2 row, 2 bodies)
Style 3A (1 row, 3 bodies) Style 3C (1 row, 3 bodies) Style 3E (1 row, 3 bodies)
Style 3B (2 row, 3 bodies) Style 3D (2 row, 3 bodies) Style 3F (2 row, 3 bodies)
Number of contacts per row: ____________ (max. 40 per row)
Special pin grid (pins missing, not fully populated). Please provide more detailed Information
Plating: Sn100 plated (all over)
flash gold plating (all over)
0,25µm gold plating (all over)
other plating requirement: ____________________
Dimensions: Full pin length (A): ______________ mm (min 8 mm, max. 80 mm)
Interface side (B): ______________ mm
Solder side (C): ______________ mm
Middle body (D): ______________ mm
Engineering Note:
The information presented in this
datasheet is accurate to the best of
our knowledge.
Due to ongoing efforts to advance
design and material performance,
this information is subject to change
without notice.
A P Products GmbH, Bäumlesweg 21 – 23, 71093 Weil im Schönbuch, Germany
Tel: +49-7157-5348-0, Fax: +49-7157-5348-39, Web: www.ap-products.de, E-mail: info@ap-products.de