Gesamtkatalog 2016-2

A P Products
2,54 mm Male Headers
Series 295P
7,5mm
(Typ,)
7,5mm
(Typ,)
2,54 mm
6,00 mm
2,54 mm
6,00 mm
B
B
1,94 mm 1,94 mm
3,30 mm
5,84 mm
Ordering Information
9x9xxx-xx-xx-xx
Product Option: 1 Row Plating Options: Contact Quantity per Row Plating Suffix
2 = Standard Product 500 = Solder Plating 1 to 36 none = Standard Product
without Kinked Tail 550 = Selective Gold / Solder plating 10 = 0,25 µm sel. Au Plating
550 = all over Gold plating SnPb30 Solder Tails
R = Standard Product 15 = 0,25 µm sel. Au Plating
with Kinked Tail as 2 Row Plating Options: Pin Length Identifier with Sn100 Solder Tails
Board Retention Feature 510 = Solder Plating Please see table below 20 = 0,50 µm sel. Au Plating
560 = Selective Gold / Solder plating SnPb30 Solder Tails
3 = High Temperature Product 560 = all over Gold plating 25 = 0,76 µm sel. Au Plating
without Kinked Tail
with Sn100 Solder Tails
3 Row Plating Options: 30 = 0,76 µm sel. Au Plating
K = High Temperature Product = Solder Plating SnPb30 Solder Tails
with Kinked Tail as = Selective Gold / Solder plating 35 = 0,76 µm sel. Au Plating
Board Retention Feature = all over Gold plating Sn100 Solder Tails
50 = Sn100 Solder Plating
Pin Length Identifier Table:
Indicator Dimension
B
Dimension
Interface
(Solder Tail)
01 3,26 mm 7,50 mm
Engineering Note:
The information presented in this
datasheet is accurate to the best of
our knowledge.
Due to ongoing efforts to advance
design and material performance,
this information is subject to change
without notice.
A P Products GmbH, Bäumlesweg 21 – 23, 71093 Weil im Schönbuch, Germany
Tel: +49-7157-5348-0, Fax: +49-7157-5348-39, Web: www.ap-products.de, E-mail: info@ap-products.de
28/09/2012 15.13.00