Gesamtkatalog 2016-2

A P Products
Elastomer
Ordering Information
930100-03-xx-xx-xx
Pitch Thickness of pad (in mm) Lengths of pad (in mm) width of pad (in mm)
0,3 mm 05 = 0,5 mm min. 03 mm min. 03 mm
10 = 1,0 mm max. 50 mm max. 50 mm
15 = 1,5 mm
20 = 2,0 mm
25 = 2,5 mm
30 = 3,0 mm
35 = 3,5 mm
40 = 4,0 mm
Mounting hardware can be provided on request.
Engineering Note:
The information presented in this
datasheet is accurate to the best of
our knowledge.
Due to ongoing efforts to advance
design and material performance,
this information is subject to change
without notice.
A P Products GmbH, Bäumlesweg 21 – 23, 71093 Weil im Schönbuch, Germany
Tel: +49-7157-5348-0, Fax: +49-7157-5348-39, Web: www.ap-products.de, E-mail: info@ap-products.de
15.06.2015 14.26.00