08.12.2012 Views

SAN Boot Implementation and Best Practices Guide ... - IBM Redbooks

SAN Boot Implementation and Best Practices Guide ... - IBM Redbooks

SAN Boot Implementation and Best Practices Guide ... - IBM Redbooks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Draft Document for Review June 27, 2012 9:05 am Storwize_V7000.fm<br />

5. Press twice to exit back to the adapter’s main menu. Now select option 1 to<br />

Configure <strong>Boot</strong> Devices, as shown in Figure 5-64<br />

Figure 5-64 Adapter (HBA Port) Settings<br />

6. Enter <strong>Boot</strong> Entry number of the first Unused boot device (Primary <strong>Boot</strong>) from the List of<br />

Saved <strong>Boot</strong> Devices, as shown in Figure 5-65.<br />

Figure 5-65 Saved <strong>Boot</strong> Devices<br />

7. The HBA will scan for fibre channel devices. Provided you have added this HBA port’s<br />

WWPN to <strong>IBM</strong> Storwize V7000’s host mappings (5.4.7, “Mapping <strong>SAN</strong> <strong>Boot</strong> Volume to the<br />

Chapter 5. <strong>SAN</strong> <strong>Boot</strong> implementation with <strong>IBM</strong> <strong>SAN</strong> Volume Controller <strong>and</strong> <strong>IBM</strong> Storwize v7000 321

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!