Catalogue Measurement Technology ProGrit
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Measurement</strong> Die PMC Power P for PMC and REFIX°<br />
Product number P-007 715<br />
Material<br />
Steel hardened stainless,<br />
aluminum, plastic<br />
Mechanical interface PMC / REFIX° symmetric and<br />
asymmetric<br />
Max. allowed pressure 13 500 N<br />
elastomer spring<br />
Application<br />
<strong>Measurement</strong> of radial rigidity<br />
of system press, die set and<br />
reference clamping system<br />
Probes 4 x P43*<br />
D x H<br />
135 x 80 mm<br />
Weight<br />
4,5 kg<br />
* Probes not in scope of delivery.<br />
Clamps<br />
Product number P-002 162<br />
Material<br />
Steel hardened stainless<br />
Mechanical interface Pitch circle clamping ring Refix°<br />
symmetric and asymmetric<br />
Application<br />
Clamping of measurement die<br />
AD 135<br />
Clamping of measurement plate PD<br />
Weight<br />
0,1 kg<br />
<strong>Measurement</strong> Pin AP 54 x 54 PMC for PMC and Macro°<br />
Product number P-001 081<br />
Material<br />
Steel hardened stainless<br />
Mechanical interface PMC / Macro°<br />
Application<br />
Dynamic measurement of press<br />
and die set geometry<br />
d x L*<br />
30 x 160 mm<br />
Weight<br />
1 kg<br />
* Further lengths on request.<br />
Further measurement devices for additional reference clamping system and sizes on request.<br />
Alignment <strong>Measurement</strong> Powder Compaction 4.0 19
Change language