Catalogue Measurement Technology ProGrit
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Measurement</strong> Tool MAS-xi for PMC and Macro°<br />
Material<br />
Steel hardened stainless,<br />
aluminum<br />
Mechanical interface PMC / Macro°<br />
Application<br />
<strong>Measurement</strong> and referencing<br />
of cross punches and die<br />
segments in relation of main<br />
compaction axis.<br />
Positioning of mechanical stops.<br />
Adjustment possibilities Continuous 360 ° rotation by<br />
rotating unit or quick<br />
adjustment (optional).<br />
Lateral shift (max. 13 mm) by<br />
means of linear table (optional)<br />
<strong>Measurement</strong> accuracy +/- 0,5 µm<br />
Clamping<br />
Top punch chuck or carrier<br />
plate top punch<br />
<strong>Measurement</strong> tool MAS QS 54x54 MAS QS 75<br />
Product number P-000 000 P-000 000<br />
Mechanical interface Macro° 54 x 54 mm Macro° d 75 mm<br />
B x T x H - mm - mm<br />
Weight 2,1 kg 2,3 kg<br />
<strong>Measurement</strong> Tool MAS-xi AOW for Mechanical Stop Cross Press Module<br />
Product number P-004 755<br />
Material<br />
Aluminum<br />
Mechanical interface Cross press module<br />
Osterwalder<br />
Application<br />
Positioning of mechanical stop<br />
Osterwalder<br />
<strong>Measurement</strong> accuracy +/- 0,5 µm<br />
Clamping<br />
Clamping on cross press<br />
module Osterwalder<br />
B x T x H<br />
155 x 80 x 110 mm<br />
Weight<br />
0,5 kg<br />
Compaction tools for multi axial compaction – cross hole, closed, opened and<br />
splitted die<br />
Design and manufacture of compaction tools for multi axial pressing for all<br />
drive concepts of the press manufacturers.<br />
Optimized drive concepts of the transverse axes including high precision<br />
and high rigid mechanical stops, which are adjustable in the micro meter<br />
range.<br />
Changeable die plate system for the quick setup of the press to multi<br />
axial compaction without realignment of the chucks. Complex die designs<br />
can be equipped and adjusted outside of the press.<br />
Adjustment system MAS-xi for transverse axes and their mechanical<br />
stops.<br />
Ask for compaction tools and optimized cross press modules<br />
for your specific multi axial compaction tasks!<br />
Alignment <strong>Measurement</strong> Powder Compaction 4.0 47