Catalogue Measurement Technology ProGrit

User friendly software and graphical alignment navigation leads
to highest positioning accuracy
- Intuitive menu driven operation
- Graphical positioning navigation
- No reading errors or incorrect operation
- Setting of accuracy limits
Intelligent measurement and displacement concept
- Positions of compaction tools can be aligned and fixed with the help of the displacement fixtures
within 1/10 micron and 1 arc second
- Displacements or deflections when tightening the compaction tools on the pallets are displayed and can be
corrected immediately
- Positional deviation of the die can be calculated into the target position of the punch
Automatic digital logging
- Automatic digital logging of the initial position and the final position of
the compaction tools
- Date stamp
- Protocol storage by USB interface in a central data pool
- Traceability of positioning results
Benefit
- Positioning and correction of compaction tools (punch and die) on pallets of reference clamping systems
- Positioning and measuring accuracy in the resolution of 1/10 micron and 1 arc second possible
- Possibility of unpalletized manufacturing of compaction tools. Tool manufacturers must not be equipped with
reference clamping systems.
- Possibility of wire cut manufacturing of punch heads. The punch head can be aligned on pallets for further
processing and use.
- Reduction of positioning time to a few minutes
- Further use of existing tools by palletizing these tools on pallets of reference clamping systems
Following reference clamping systems are supported:
- Erowa, ProGrit, System 3R°
32 Alignment Measurement Powder Compaction 4.0