InstallShield 2012 Express Edition User Guide - Knowledge Base ...

Table 23-5: Add Alias Panel Settings (cont.)
Setting Description
Driver Name If you selected a preconfigured alias, this field contains the
appropriate driver. If you are creating a custom alias, select the
driver you want your alias associated with.
Note: The driver you select here is not installed unless you check it
in the BDE Merge Module Configuration Utility.
Parameter Overrides If you selected a preconfigured alias the default parameter
overrides appear in this text box. Type in custom overrides or
accept the defaults as needed by your application. For custom
aliases, you can press the Defaults button to show the default
parameters for the driver you selected.
Defaults Click the Defaults button to revert the parameter overrides to their
default state.
Clear Click the Clear button to clear the parameter overrides text box.
BDE Merge Module Configuration Utility
Chapter 23: Wizard Reference
BDE Designer
The BDE Merge Module Configuration Utility, provided by Borland, allows you to customize the BDE
installation to fit your product’s needs.
Table 23-6: BDE Merge Module Configuration Utility Settings
Setting Description
Alias Select from the list the Alias you want to include in your setup. If
you have not yet created an alias, click the Add button.
Add Click the Add button to view the Add Alias panel and add aliases to
your setup.
Edit Click the Edit button to change the settings of an alias.
Delete Click the Delete button to remove an alias from the list.
Driver Check the box next to the driver or drivers you want to install. If you
know the necessary driver is already on the target machine you can
skip this step.
Note: You can use standard MSI folders, such as
[ProgramFilesFolder] when specifying the driver. You can also use
[INSTALLDIR].
InstallShield 2012 Express Edition User Guide ISE-1800-UG01 441