InstallShield 2012 Express Edition User Guide - Knowledge Base ...

Table 24-67: Settings on the Events Tab (cont.)
Setting Media Type Description
FTP Site User
Name
Custom, CD-ROM,
DVD,
SingleImage,
WebDeployment
FTP Site Password Custom, CD-ROM,
DVD,
SingleImage,
WebDeployment
Distribute After
Build
Custom, CD-ROM,
DVD,
SingleImage,
WebDeployment
QuickPatch Projects
Chapter 24: View Reference
QuickPatch Projects
A QuickPatch project is a specific type of Windows Installer–based project recommended for
installation authors who want to ship small, single upgrades to their end users. Each QuickPatch project
has its own views.
Define Patch Settings View
If a user name is required to upload to the FTP location that you are
specifying, enter the user name.
Note: If you enter a user name for one of the releases in your project, that
same user name is used for other releases in the same project and in other
Express projects.
If a password is required to upload to the FTP location that you are
specifying, enter the password.
Note: If you enter a password for one of the releases in your project, that
same password is used for other releases in the same project and in other
Express projects.
Specify whether you want the build engine to automatically distribute your
release after each build to the location that you specified.
Tip: To quickly distribute your release on demand, instead of after each
build, right-click the release and click Distribute. Note that the Distribute
command is available only if the release has been built at least once.
The Define Patch Settings view is available when you open or create a QuickPatch project. Once you
open or create a QuickPatch project, you can configure some of the basic settings in the Define Patch
Settings view. Use this view to configure your QuickPatch.
The following table describes the views under the Define Patch Settings view:
Table 24-68: Views Under the Define Patch Settings View
View Description
General Information Enter information about your product and the original installation. Specify which releases
should be patched by the current project, and select which custom actions should be
included.
InstallShield 2012 Express Edition User Guide ISE-1800-UG01 597