Learning ArcGIS Pro

24. Click on the browse button located next to the Symbology layer.
25. Click on Folders located under Project in the left pane.
26. Select the Watersheds.lyrx file and click on the Select button.
27. Make sure that the following are set under the Symbology fields in the
Geoprocessing pane:
Type: Value_Field
Source Field: WATERSHED
Target Field: WATERSHED
28. Once you have verified the Symbology fields, click on the Run button located at the
bottom of the Geoprocessing pane.
29. Save your project.
Step 5 – connecting to ArcGIS server
You are almost done. At the last minute, it has been decided that you need to add an aerial
photograph to the map. You have been instructed to use aerials served up by Fulton
County using ArcGIS for Server. So, you will need to first add a connection to the
County’s ArcGIS Server and then add the new aerial layer to the map:
1. Right-click in the Project pane somewhere that is blank.
2. Click on New ArcGIS Server connection.
3. For the server URL: type http://share.myfultoncountyga.us/ArcGIS10/rest/services.
4. Leave User Name and Password blank and click on OK.
5. You should now see that servers have been added to your Project pane. Expand the
Servers section to reveal the new connection you just added.
6. Expand the ArcGIS10 on share.myfultoncountyga.us (user) (1) connection to
reveal the map services that can be used via this connection.