Learning ArcGIS Pro

Recommendations

Info

window. Once you have opened the Chapter11 folder, you should see the Zoning_Layer.kmz file you created in ArcGIS Pro. 5. Move and resize the Explorer Window and Google Earth, so they are both visible at the same time similar to the following image. If you are using multiple monitors, you can place the Explorer window on one and Google Earth on the other. 6. Select the Zoning_Layer.KMZ file in Explorer. Drag and drop it into Google Earth. This should add the Zoning layer to Google Earth. 7. Close the Explorer window. You should see that the Zoning layer for the City of Trippville has now been added to Google Earth. The symbology should be very close to what you saw in ArcGIS Pro. It will not be exact because the two applications apply symbology differently.
Feel free to explore Google Earth and the layer you just added. See if you can find ways to add other types of data. 8. Close Google Earth once you are done exploring. You can save or discard your changes as desired. 9. In ArcGIS Pro, save your project and close the application. You have just successfully exported your GIS data to another non-Esri GIS format, which you were then able to open in a completely different application. Now you will explore ways that you can export GIS data to non-GIS formats, so others without GIS software or skills can use it. Note If you only wish to view a single KMZ or KML file, you can just double-click on the file in File Explorer, and it will automatically open with Google Earth as long as that is the default program assigned to that file type.
Page 3 and 4:
Learning ArcGIS Pro
Page 5 and 6:
Conducting a silent install for IT
Page 7 and 8:
Step 4 - adjusting the layers Step
Page 9 and 10:
Challenge Exercise 6B - creating an
Page 11 and 12:
Overlay analysis Union Intersect Pr
Page 13 and 14:
Step 3 - adding another process Run
Page 15:
Chapter 8 - Geoprocessing Chapter 9
Page 19:
Learning ArcGIS Pro Copyright © 20
Page 23:
About the Author Tripp Corbin, GISP
Page 27 and 28:
www.PacktPub.com
Page 29 and 30:
Why subscribe? Fully searchable acr
Page 32 and 33:
Preface Esri’s ArcGIS Platform is
Page 34:
Chapter 11, Sharing Your Work, illu
Page 38:
Who this book is for This book is f
Page 42:
Reader feedback Feedback from our r
Page 45 and 46:
Downloading the exercise data You c
Page 47 and 48:
Errata Although we have taken every
Page 49:
Questions If you have a problem wit
Page 52 and 53:
Installing ArcGIS Pro In order to u
Page 54 and 55:
Operating system requirements ArcGI
Page 56 and 57:
Other software requirements ArcGIS
Page 58 and 59:
production. It can also allow you t
Page 60 and 61:
Once you get to the Downloads page,
Page 62 and 63:
Pro in addition to other applicatio
Page 64:
Conducting a silent install for IT
Page 67 and 68:
The number and level of ArcGIS Pro
Page 69 and 70:
Managing ArcGIS Pro licenses As we
Page 72 and 73:
Launching ArcGIS Pro Now that you h
Page 74 and 75:
The C:\ drive may be found under th
Page 76 and 77:
showing a granite quarry. One is a
Page 79:
Summary You successfully installed
Page 82 and 83:
Understanding the new interface ter
Page 85 and 86:
Using the interface Now that you un
Page 87 and 88:
New The New tool will open a brand
Page 89 and 90:
The MAP tab contains six groups: Cl
Page 91 and 92:
This tool is basically the same as
Page 93 and 94:
The Inquiry group The Inquiry group
Page 95 and 96:
Exercise 2A - working with the MAP
Page 97 and 98:
Question: What happens when you cli
Page 99 and 100:
list? _____________________________
Page 101 and 102:
19. Now roll the wheel back toward
Page 104 and 105:
Contextual tabs Now that you have h
Page 106 and 107:
highways could be labeled using a d
Page 108 and 109:
You have just added three new layer
Page 110 and 111:
The Symbology pane will once again
Page 112 and 113:
5. In the Label Class pane, click o
Page 114:
3D symbology to this layer. 8. Clic
Page 118 and 119:
Chapter 3. Creating and Working wit
Page 120 and 121:
Understanding project terminology L
Page 122 and 123:
The Portal tab provides access to c
Page 124 and 125:
Exercise 3A - using the Project pan
Page 126 and 127:
Note It is possible that you may se
Page 128 and 129:
Watersheds layer. 4. Right-click on
Page 130 and 131:
24. Click on the browse button loca
Page 132:
11. In the Effects group tab, set t
Page 135 and 136:
Creating a new project with Esri te
Page 137 and 138:
Question: What is available or list
Page 139 and 140:
11. In the add elevation source win
Page 141 and 142:
Custom project templates In the pre
Page 143 and 144:
Exercise 3C - creating a custom pro
Page 145 and 146:
10. Using the skills you have learn
Page 147 and 148:
do this, you should see that the ma
Page 149 and 150:
single 2D map and a layout. It will
Page 152:
Summary In this chapter, you learne
Page 155 and 156:
Creating and configuring 2D maps Ar
Page 157 and 158:
Another way is to import an existin
Page 159 and 160:
7. Now you need to connect to the T
Page 161 and 162:
12. Holding down your Ctrl key, sel
Page 163 and 164:
18. Expand the symbology for the zo
Page 165 and 166:
Step 2 - filtering a layer with a d
Page 167 and 168:
18. Right-click on the City Limits
Page 169 and 170:
Exercise 4C - using map and layer f
Page 171 and 172:
Step 3 - labeling Now the Director
Page 174:
Challenge The Community and Economi
Page 178 and 179:
Chapter 5. Creating 3D Maps As the
Page 180 and 181:
and vertically. Note Warning: At th
Page 182 and 183:
When completed, your Contents pane
Page 184 and 185:
extrude the buildings, so their tru
Page 187 and 188:
Elevations When you create a 3D map
Page 189 and 190:
value of the averaged elevation it
Page 191 and 192:
Because a TIN is vector-based data
Page 193 and 194:
height value producing a flat top f
Page 195 and 196:
Exercise 5B - creating a local scen
Page 197 and 198:
Light_Poles 2. Drag the Buildings l
Page 199 and 200:
Symbol Search: Pole Symbol: Telepho
Page 202:
Summary As you saw, ArcGIS Pro supp
Page 205 and 206:
Things you need to consider when de
Page 207 and 208:
Note Purpose of Map 1: ____________
Page 209 and 210:
The audience The audience that will
Page 211 and 212:
A situation A situation is all abou
Page 214 and 215:
Creating a layout in ArcGIS Pro Now
Page 216 and 217:
You should now see a new blank layo
Page 218 and 219:
Height = 30 in Position: X = 1 in Y
Page 220 and 221:
Dynamic text is text that reference
Page 222 and 223:
9. Save your project. Challenge Usi
Page 224:
Prop. This assigns the correct map
Page 228:
Summary You learned how to create s
Page 231 and 232:
Editable data formats ArcGIS Pro al
Page 233 and 234:
This is the reason Esri developed t
Page 236 and 237:
How to edit data using ArcGIS Pro T
Page 238 and 239:
The EDIT tab on the ribbon as shown
Page 240 and 241:
With Snapping enabled, you can snap
Page 242 and 243:
Creating new features Creating a ne
Page 244 and 245:
Question: What geodatabase is being
Page 246 and 247:
check: 17. Click on the PROJECT tab
Page 248 and 249:
There is no need to have the imager
Page 250 and 251:
Note If you forget to double-click
Page 252 and 253:
8. If you are happy with the new se
Page 254 and 255:
15. The segment should automaticall
Page 256 and 257:
25. Move your mouse pointer along t
Page 258 and 259:
34. Activate the Line tool once aga
Page 260 and 261:
You have now seen how to add new fe
Page 263 and 264:
Editing your schema As the needs of
Page 265 and 266:
approximately. Float or Single Stor
Page 267 and 268:
6. A new tab should open in the mai
Page 269 and 270:
4. Right-click on the new field you
Page 271 and 272:
Exercise 7C - importing a Shapefile
Page 273:
You have just converted a Shapefile
Page 277 and 278:
Chapter 8. Geoprocessing You have l
Page 279 and 280:
Licensing levels If you remember fr
Page 281 and 282:
Extensions for ArcGIS Pro Esri also
Page 283 and 284:
an elevation or height associated w
Page 285 and 286:
Exercise 8A - determining the licen
Page 288 and 289:
The analysis process Analysis norma
Page 290 and 291:
Preparing data for analysis As you
Page 292 and 293:
As you can see, the initial parcel
Page 294 and 295:
You might use the Append tool if yo
Page 296 and 297:
Step 2 - clipping the streets In th
Page 298 and 299:
10. Once you have verified the Diss
Page 300 and 301:
Other commonly used geoprocessing a
Page 302 and 303:
The resulting output of the Interse
Page 304 and 305:
This illustration shows the differe
Page 306 and 307:
Exercise 8C - performing analysis R
Page 308 and 309:
When Select By Location completes,
Page 310 and 311:
4. Select the Union tool from the T
Page 312 and 313:
Note When converting units using th
Page 314:
13. Using the skills you have learn
Page 318 and 319:
Chapter 9. Creating and Using Tasks
Page 320 and 321:
Components of a task Each task you
Page 322 and 323:
Each step is going to have several
Page 324 and 325:
Exercise 9A - running a simple task
Page 327 and 328:
Creating tasks Creating a task is n
Page 329 and 330:
Now that you have the Task Item ope
Page 331 and 332:
Things to consider As mentioned pre
Page 333 and 334:
Creating a task As you have learned
Page 336 and 337:
Exercise 9C - creating a task In th
Page 339 and 340:
Task steps Steps are really the mea
Page 341 and 342:
Instructions are one of the most im
Page 343 and 344:
You can save currently selected fea
Page 345 and 346:
Contents Just as you can control wh
Page 347 and 348:
Run/Proceed Instructions mentioned
Page 349 and 350:
4. Save your project. You have now
Page 351 and 352:
9. Once you have verified your sett
Page 354:
Summary In this chapter, you learne
Page 357 and 358:
Tasks, geoprocessing models, and Py
Page 359 and 360:
Python script A Python script is al
Page 362 and 363:
Creating geoprocessing models As me
Page 364 and 365: Since ModelBuilder is a visual prog
Page 366 and 367: You can also create other custom TB
Page 368 and 369: Exercise 10A - creating a model A n
Page 370 and 371: 5. The input feature class for the
Page 372 and 373: tool. 4. Using your scroll wheel, z
Page 374 and 375: Running a model After creating a mo
Page 376 and 377: Note Question: How have the graphic
Page 378 and 379: will state that there are No Parame
Page 380 and 381: Exercise 10C - making a model inter
Page 382 and 383: 5. Right-click on the Distance vari
Page 385 and 386: Python Python is the primary script
Page 387 and 388: Traditionally, the first group of l
Page 389 and 390: The ArcPy module The ArcPy module i
Page 391 and 392: Help for all tools in ArcGIS Pro ca
Page 393 and 394: Exercise 10D - creating a Python sc
Page 395 and 396: your file AcresWebProject.py. Click
Page 397 and 398: 25. Once you have verified your scr
Page 400: Summary ArcGIS Pro contains two met
Page 403 and 404: Sharing content with those on your
Page 405 and 406: map in the Ex11 project. Step 2 - u
Page 407 and 408: as layer and map files, do not stor
Page 409 and 410: Exporting to other GIS formats ArcG
Page 411 and 412: 5. Read the short descriptions for
Page 413: 10. Once you have verified that the
Page 417 and 418: PDFs also allow you to secure the f
Page 420 and 421: Sharing content with those not on y
Page 422 and 423: The layer package pane should now l
Page 424 and 425: 1. In the Project pane, right-click
Page 426: Project packages Project packages t
Page 430 and 431: Appendix A. ArcGIS Pro Glossary Thi
Page 432 and 433: Feature dataset: This is a collecti
Page 434 and 435: including the referenced data. It i
Page 437 and 438: Appendix B. Chapter Questions and A
Page 440: Chapter 2 - Using ArcGIS Pro - Navi
Page 444: Chapter 4 - Creating 2D Maps What d
Page 448 and 449: Chapter 6 - Creating a Layout Purpo
Page 451: Chapter 7 - Editing Spatial and Tab
Page 455: Chapter 9 - Creating and Using Task
Page 459 and 460: Chapter 11 - Sharing Your Work What
Page 461 and 462: project, opening / Step 1 - open Ar
Page 463 and 464: B broken data links URL / Layout fi
Page 465 and 466:
D 2D and 3D layers working with / E
Page 467 and 468:
E editable data formats defining /
Page 469 and 470:
G GeoEnrichment service about / The
Page 471 and 472:
I Inquiry group about / The Inquiry
Page 473 and 474:
L layer file, ArcGIS Pro defining /
Page 475 and 476:
M map files about / Map files chall
Page 477 and 478:
O operating system (OS) about / Ope
Page 479 and 480:
IDLE, opening / Step 1 - open IDLE
Page 481 and 482:
S scale bars reference / The challe
Page 483 and 484:
Global Scene.aptx / New Local Scene
Page 485:
W Web Mapping Service (WMS) about /
show all

Learning ArcGIS Pro

Create successful ePaper yourself

Delete template?

Save as template?