Learning ArcGIS Pro

When Select By Location completes, you should have approximately 18 commercial
properties selected. All of these are overlapped or touched by the sewer line buffer you
created. This means they are all within 150 feet of an existing sewer line. You will now
export those selected parcels to their own layer.
Step 2 – exporting selected parcels
Now that you have identified which commercial properties are within 150 feet of a sewer
line, you will export those to a new feature class so you can use them for further analysis
later. This will ensure you don’t mistakenly change or corrupt the existing layer by
accident:
1. Select the Commercial Properties 1 to 3 AC in the Contents pane.
2. Select the Data tab in the Feature Layer group.
3. Click on the Export Features button located in the Export group of the Data tab to
display the parameters for the Copy Features tool in the Geoprocessing pane.
4. Input Features should automatically be set to Commercial Properties 1 to 3 AC.
If not, set it to that layer.
5. Set the Output Feature Class to
C:\Student\IntroArcPro\Chapter8\Ex8B\Ex8B.gdb\CommercialProp_near_sewer.
6. Verify your Geoprocessing pane looks like the following image and click Run: