Installation Manual Truck Edition V-520 Series Single ... - Thermo King
Installation Manual Truck Edition V-520 Series Single ... - Thermo King
Installation Manual Truck Edition V-520 Series Single ... - Thermo King
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Cut the Hose<br />
1. Cut the hose to proper length with an appropriate cutting tool.<br />
Hand-held hose cutter (204-677) has been specially designed for<br />
cutting all non-wire reinforced hose, such as TK 2000 Multi-refrigerant<br />
hose. Be sure the cut is made square to the hose length.<br />
Fabricating Refrigeration Hoses<br />
Slip on Two Clamps<br />
2. Install two proper- size clips onto the cut end of the hose. Orientation of<br />
the clips does not affect the performance of the connection. However<br />
for ease of assembly, both clips should have the same orientation.<br />
CAUTION: Failure to slide the clips over the hose at this time will<br />
require the clips to be stretched over the hose or fitting later.<br />
This may permanently damage the clip<br />
25
Change language