Installation Manual Truck Edition V-520 Series Single ... - Thermo King

More documents

Recommendations

Info

Installation - Electric Standby Power Supply (20 Models Only) DANGER: Electrical cord must not be connected to an electrical power source during installation. NOTE: Thermo King recommends a 20 amp fused power source for electric standby operation. IMPORTANT: See drawing 2C21034 in the back of this manual for receptacle wiring details, 1. Choose an appropriate location, remove cover and mount receptacle box to truck with appropriate hardware. 2. Route the electrical wire from the unit to the receptacle box providing for a drip loop. Secure using the clamps provided. 3. Cut off excess electrical wire and connect to receptacle. IMPORTANT: Do not roll up the excess electrical wire or create splices in the electrical wire. 4. Reinstall cover. 54
Installation - Electric Standby Power Supply (20 Models Only) 55
Page 1 and 2:
Installation Manual Truck Edition V
Page 3 and 4: This manual was written to assist w
Page 5 and 6: Recover Refrigerant At Thermo King,
Page 7 and 8: WARNING: Never drill holes in the u
Page 9 and 10: Tips for a Successful Installation
Page 11 and 12: Required Tools 11
Page 13 and 14: Approximate Weight: ES-300 = 18 kg
Page 15 and 16: In-Cab Controller Dimensions A. 140
Page 17 and 18: Installation - Vehicle Powered Comp
Page 19 and 20: Installation - V-520 Condenser 19
Page 21 and 22: Installation - (1) ES-500 Evaporato
Page 23 and 24: Installation - (2) ES-300 Evaporato
Page 25 and 26: Cut the Hose 1. Cut the hose to pro
Page 27 and 28: Snap on the Cage 5. Snap the cage i
Page 29 and 30: CAUTION: TK 2000 Speedy Clip System
Page 31 and 32: Installation - Refrigeration Hoses
Page 33 and 34: LIS-01/CLU-2 Installation - Jet Coo
Page 43 and 44: System Leak Check and Evacuation 43
Page 45 and 46: Electrical Connections - Evaporator
Page 47 and 48: Electrical Connections - Evaporator
Page 49 and 50: Installation - Drain Hoses Single T
Page 51 and 52: Installation - Drain Hoses SPECTRUM
Page 53: Installation - In-Cab Controller 53
Page 57 and 58: Electrical Connections - Engine Com
Page 59 and 60: System Charging 59
Page 61 and 62: All mounting holes and access holes
Page 63: Wiring Diagram and Wiring Schematic
show all

Installation Manual Truck Edition V-520 Series Single ... - Thermo King

Create successful ePaper yourself

Delete template?

Save as template?