24.05.2017 Views

Chem Notebook COmplete

By: Enmanuel Garrido

By: Enmanuel Garrido

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

The Time-Temperature Graph<br />

We are going to heat a container that has 72.0 grams of ice (no liquid water yet!) in it. To make the<br />

illustration simple, please consider that 100% of the heat applied goes into the water. There is no loss<br />

of heat into heating the container and no heat is lost to the air.<br />

Let us suppose the ice starts at -10.0 °C and that the pressure is always one atmosphere. We will<br />

end the example with steam at 120.0 °C.<br />

There are five major steps to discuss in turn before this problem is completely solved. Here they are:<br />

1. the ice rises in temperature from -10.0 to 0.00 °C.<br />

2. the ice melts at 0.00 °C.<br />

3. the liquid water then rises in temperature from zero to 100.0 °C.<br />

4. the liquid water then boils at 100.0 °C.<br />

5. the steam then rises in temperature from 100.0 to 120.0 °C<br />

Each one of these steps will have a calculation associated with it. WARNING: many homework and<br />

test questions can be written which use less than the five steps. For example, suppose the water in<br />

the problem above started at 10.0 °C. Then, only steps 3, 4, and 5 would be required for solution.<br />

To the right is the type of graph which is typically used to<br />

show this process over time.<br />

You can figure out that the five numbered sections on the<br />

graph relate to the five numbered parts of the list just above<br />

the graph.<br />

Also, note that numbers 2 and 4 are phases changes: solid<br />

to liquid in #2 and liquid to gas in #4.<br />

Q=mcΔT<br />

where ΔT is (Tf – Ti)<br />

Here are some symbols that will be used, A LOT!!<br />

Δt = the change in temperature from start to finish in degrees Celsius (°C)<br />

m = mass of substance in grams<br />

c = the specific heat. Its unit is Joules per gram X degree Celsius (J / g °C is one way to write<br />

the unit; J g¯1 °C¯1 is another)<br />

q = the amount of heat involved, measured in Joules or kilojoules (symbols = J and kJ)<br />

mol = moles of substance.<br />

ΔH is the symbol for the molar heat of fusion and ΔH is the symbol for the molar heat of<br />

vaporization.<br />

We will also require the molar mass of the substance. In this example it is water, so the molar mass is<br />

18.0 g/mol.<br />

Notes:

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!