CRT 48 Operation - Wacker Neuson

More documents

Recommendations

Info

Operation CRT 48 2.2 Features and Controls wc_tx000641gb.fm 20
CRT 48 Operation Control locations and functions: Ref. Description Ref. Description a Right pitch control l Engine choke control (if equipped) b Fuel tank m Work light switch c Control arms n Glow plug indicator light (if equipped) d Operator’s seat with “operator presence” switch o Engine keyswitch e Left pitch control p Hour meter f Rear work light (one each side) q Water spray control g Water tank r Oil pressure indicator light h Work light (one each side) s Alternator charging indicator light k Foot pedal (throttle control) t Coolant temperature indicator light The Ride-On Trowel features a seat with an integrated “operator presence” system, which works in conjunction with a throttle mounted switch. This system allows the engine to remain running (idling) with no operator seated in the seat, as long as the throttle is not depressed. This system meets all safety requirements and eliminates the need for a foot-operated “kill switch”. To familiarize a new operator with the Ride-On Trowel the following steps should be taken: 2.2.1 With the operator in the seat, show him or her the functions of the control arms (c) and how to start the machine. 2.2.2 Have the operator practice steering the trowel. A hard concrete slab slightly wetted with water is an ideal place for an operator to practice with the machine. For this practice, pitch the blades up approximately 6,35 mm (¼") on the leading edge. Start by making the machine hover in one spot, and then practice driving the machine in a straight line and making 180° turns. The best control is achieved at full rpm. wc_tx000641gb.fm 21
Page 1: OPERATOR’S MANUAL 0 1 6 3 2 0 4 E
Page 4 and 5: wc_tx000001gb.fm 4
Page 6 and 7: Table of Contents CRT 48 3.12 Spark
Page 8 and 9: Safety Information CRT 48 1.2 Opera
Page 10 and 11: Safety Information CRT 48 1.4 Servi
Page 12 and 13: Safety Information CRT 48 W H V M J
Page 14 and 15: Safety Information CRT 48 Ref. Labe
Page 16 and 17: Safety Information CRT 48 Ref. Labe
Page 18 and 19: Safety Information CRT 48 Notes 18
Page 22 and 23: Operation CRT 48 2.3 New Machines S
Page 24 and 25: Operation CRT 48 2.7 Stopping 2.8 O
Page 26 and 27: Operation CRT 48 b 2.10 Pitch Adjus
Page 28 and 29: Maintenance CRT 48 3.2 Trowel Gearb
Page 30 and 31: Maintenance CRT 48 3.3 Control Link
Page 32 and 33: Maintenance CRT 48 3.7 Blade Arm Ad
Page 34 and 35: Maintenance CRT 48 3.10 Drive Belt
Page 36 and 37: Maintenance CRT 48 3.12 Spark Plug-
Page 38 and 39: Maintenance CRT 48 3.14 Engine Oil
Page 40 and 41: Maintenance CRT 48 3.15 Engine Oil
Page 42 and 43: Maintenance CRT 48 Problem Reason R
Page 44 and 45: Technical Data CRT 48 4.2 Trowel Pa
Page 48 and 49: Trowel.qxd 11/24/04 10:18 AM Page 1
Page 60 and 61: AEM_ConcretePowerTrowel.qxd 7/23/03
Page 62: Wacker Construction Equipment AG ·

CRT 48 Operation - Wacker Neuson

Create successful ePaper yourself

Delete template?

Save as template?