CRT 48 Operation - Wacker Neuson
CRT 48 Operation - Wacker Neuson
CRT 48 Operation - Wacker Neuson
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance <strong>CRT</strong> <strong>48</strong><br />
3.12 Spark Plug-Vanguard<br />
WARNING<br />
Clean or replace spark plug as needed to ensure proper operation.<br />
Refer to the engine owner’s manual.<br />
Note: Refer to the Technical Data for the recommended spark plug<br />
type and the electrode gap setting.<br />
The muffler and engine cylinder become very hot during operation and<br />
remain hot for a while after stopping the engine. Allow engine to cool<br />
before removing spark plug.<br />
3.12.1 Remove spark plug and inspect it.<br />
3.12.2 Replace plug if the insulator is cracked or chipped. Clean spark plug<br />
electrodes with a wire brush.<br />
3.12.3 Set the electrode gap.<br />
3.12.4 Tighten spark plug securely.<br />
NOTICE: A loose spark plug can become very hot and may cause<br />
engine damage.<br />
wc_tx000642gb.fm 36
Change language