CRT 48 Operation - Wacker Neuson
CRT 48 Operation - Wacker Neuson
CRT 48 Operation - Wacker Neuson
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance <strong>CRT</strong> <strong>48</strong><br />
3.7 Blade Arm Adjustment<br />
To eliminate wobble:<br />
3.7.1 Pitch the blades flat.<br />
3.7.2 Tighten lock nut located at the bottom of each pitch cable. Maximum<br />
cable play should be no more than 3.18 mm (.125”) or the width of the<br />
cable.<br />
3.7.3 Set gap on all adjustable links to 4.58 mm (.180 in.).<br />
3.8 Mounting Float Pans<br />
See Graphic: wc_gr000275<br />
Certain applications may require the use of float pans. Optional float<br />
pans (a) are available, and are used with the machines in the nonoverlapping<br />
configuration only.<br />
To mount float pans:<br />
Lift trowel off the ground with the engine off and position the pan<br />
against the blades. Turn pan either to the right or left to engage clip<br />
angles (b) as shown. Remember, the right-hand trowel blades turn<br />
counterclockwise; the left-hand blades turn clockwise.<br />
wc_tx000642gb.fm 32
Change language