Junos OS Interfaces Configuration Guide for ... - Juniper Networks

Junos OS Interfaces Configuration Guide for Security Devices
Table 7: Network Interface Names (continued)
10
Name Part
slot
pim-or-ioc
port
Meaning
Number of the chassis slot in
which a PIM or IOC is
installed.
Number of the PIM or IOC on
which the physical interface
is located.
Number of the port on a PIM
or IOC on which the physical
interface is located.
Possible Values
J Series Services Router: The slot number begins at 1 and increases as
follows from top to bottom, left to right:
• J2320 router—Slots 1 to 3
• J2350 router—Slots 1 to 5
• J4350 or J6350 router—PIM slots 1 to 6
The slot number 0 is reserved for the out-of-band management ports.
SRX5600 and SRX5800 devices: The slot number begins at 0 and increases
as follows from left to right, bottom to top:
• SRX5600 device—Slots 0 to 5
• SRX5800 device—Slots 0 to 5, 7 to 11
SRX3400 and SRX3600 devices: The Switch Fabric Board (SFB) is always
0. Slot numbers increase as follows from top to bottom, left to right:
• SRX3400 devce—Slots 0 to 4
• SRX3600 device—Slots 0 to 6
J Series devices: This number is always 0. Only one PIM can be installed in
a slot.
SRX5600 and SRX5800 devices: For 40-port Gigabit Ethernet IOCs or
4-port 10-Gigabit Ethernet IOCs, this number can be 0, 1, 2, or 3.
SRX3400 and SRX3600 devices: This number is always 0. Only one IOC
can be installed in a slot.
J Series Services Routers:
• On a single-port PIM, the number is always 0.
• On a multiple-port PIM, this number begins at 0 and increases from left
to right, bottom to top, to a maximum of 3.
On SRX5600 and SRX5800 devices:
• For 40-port Gigabit Ethernet IOCs, this number begins at 0 and increases
from left to right to a maximum of 9.
• For 4-port 10-Gigabit Ethernet IOCs, this number is always 0.
On SRX3400 and SRX3600 devices:
• For the SFB built-in copper Gigabit Ethernet ports, this number begins
at 0 and increases from top to bottom, left to right, to a maximum of 7.
For the SFB built-in fiber Gigabit Ethernet ports, this number begins at
8 and increases from left to right to a maximum of 11.
• For 16-port Gigabit Ethernet IOCs, this number begins at 0 to a maximum
of 15.
• For 2-port 10-Gigabit Ethernet IOCs, this number is 0 or 1.
Port numbers appear on the PIM or IOC faceplate.
Copyright © 2011, Juniper Networks, Inc.