CONSTRUCTION CHEMICALS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MegaKalıp MY<br />
Instant Mineral Oil Based Release Agent<br />
PRODUCT DESCRIPTION<br />
An environmental friendly release agent, which enables convenient release of concrete from<br />
the mold and so obtainment of concrete with smooth surface.<br />
AREAS OF USE<br />
MegaKalıp MY can be used for steel, plastic, plywood and wooden mold systems. The<br />
product enables the release of the concrete from the mold smoothly and free from stains.<br />
PRODUCT ADVANTAGES<br />
• Enables convenient release of molds from concrete surfaces.<br />
• Ensures excellent concrete surface quality.<br />
• Does not leave stains on mold items, facilitates the cleaning of the same, and ensures<br />
excellent protection. The product elongates the economic life of the mold.<br />
• Prevents the formation of deposits thanks to its cleaning features.<br />
• It’s a biologically decayable, non-toxic product.<br />
• Does not leave any traces on the concrete surface and does not penetrate into the concrete<br />
mix.<br />
• A ready to use product, which is applied easily and rapidly.<br />
PERFORMANCE<br />
Density at 15 o C 0.865 gr/cm 3 ASTM D 4052<br />
Flashing point 185 ASTM D 93<br />
Cinematic viscosity at 40 o C 13.7 cSt ASTM D 445<br />
Refractive index 1.4855 ASTM 1747<br />
The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C<br />
temperature and 50% ± 5 relative humidity conditions.<br />
The values provided as per the table may vary depending on the surface and ambient<br />
conditions.<br />
REFERENCE STANDARDS<br />
Certifications/Standards<br />
TS 12153<br />
Ministry of Public Works and Settlement Item No.<br />
Ministry of Public Works and Settlement Item No.: 04.116/2<br />
QUALITY CERTIFICATES<br />
TSE (Class L) - Molding Oils (Group B)<br />
Mixing Period<br />
MegaKalıp MY is a ready to use product.<br />
Application Equipment<br />
• Spray gun<br />
• Roller<br />
• Brush<br />
Equipment Cleaning<br />
The equipment used should be cleaned with hot water and detergent following the<br />
application.<br />
TECHNICAL PROPERTIES<br />
Chemical Structure: Mineral oil based release agent<br />
Density: 0.865 gr/cm 3<br />
Cinematic Viscosity (40°C): 13.7 cSt<br />
CONSUMPTION<br />
Appropriate consumption volume for surface with surface area around 20 - 40 m 2 is 1 liter.<br />
The said value may vary depending on the surface condition and the type of mold used, and<br />
the count of use.<br />
PACKAGING<br />
MegaKalıp MY is supplied in 30 liter plastic drums and 210 liter steel barrels.<br />
SHELF LIFE<br />
The shelf life of the product is 3 years when stored within non tampered original packaging<br />
in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and<br />
+25°C) environment.<br />
STORAGE CONDITIONS<br />
The product should be stored within non-tampered original packaging in dry (maximum relative<br />
humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment.<br />
It should not be exposed to direct sunlight.<br />
The container of the product should be closed firmly when not used.<br />
SAFETY PRECAUTIONS<br />
Do use goggles and glows during application. Please refer to the Safety Data Sheet (SDS) as<br />
appropriate for easy and safe application.<br />
APPLICATION PROCEDURE<br />
Application Surfaces<br />
• Steel<br />
• Plastic<br />
• Plywood<br />
• Wooden molds<br />
• Tunnel - formed molds<br />
Surface Preparation<br />
There should not be any chemical wastes or residues (diesel oil, gas etc.) on the mold<br />
surfaces, and particularly in the cases, where the release agent employed is changed, the<br />
surfaces must be cleaned to be free from any residues of any previous release agent used.<br />
Application Methods<br />
The product is applied via spraying, roller or brush on clean mold surfaces. Due consideration<br />
should be given to apply minimum amount of product in the thinnest layer practicable.<br />
Application Recommendations<br />
• Excessive use of oil would lead to the formation of stains on the concrete; therefore, any<br />
extra oil on the surface should be cleaned via a sponge, cloth etc.<br />
• In case of highly absorbent surfaces, a second layer should be applied where necessary.<br />
• Refer to our technical support hotline for recommendation on different surface applications.<br />
(PHONE: 444 4 595)<br />
Surface and Ambient Temperature<br />
The surface and ambient temperature should be between +10°C and + 35°C whilst<br />
application.<br />
APPLICATION INSTRUCTIONS<br />
Mixing Ratio<br />
MegaKalıp MY is a ready to use product.<br />
Mixing Equipment<br />
MegaKalıp MY is a ready to use product.<br />
147