PACKAGING Megaİzo PU Mastik LM is delivered in net 600 ml sausage – shaped packages (20 Sausage Shaped Packages/Box). SHELF LIFE The shelf life of the product is 12 months when stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The product is cured in contact with air and should, therefore, be consumed rapidly upon the opening of the package. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. 91
Megaİzo PU Mastik HM Polyurethane Based, Single Component, High Module Joint Sealant PRODUCT DESCRIPTION Highly elastic, high module polyurethane joint sealant for construction joints. AREAS OF USE Megaİzo PU Mastik HM is used for preventing leakage in the expansion and dilatation joints on floors, particularly in such spaces that are characterized by pedestrian and vehicle traffic (eg. parking garages and pavements/side walks), for the filling of the joints of such structures as bridge piers, dams, tunnels and concrete roads, in the cracks and gaps of reinforced concrete water reservoirs, seams of irrigation canals, roofs, rainwater gutters and the joints and seams of rainwater drainage pipes and antenna and chimney flashings. The product is also used for the filling of construction joints in warehouses and production spaces and such industrial floors, where such industrial operations as food and pharmaceutical production are carried out. The product adheres to such surfaces as ceramic tile, concrete, plaster, rock, marble, wooden, aluminum, metal plate, brick and enameled surfaces. It is also used for the assemblage of aluminum, wooden and PVC joinery. The product is also fit for use for filling and sealing the gaps amongst the blocks and details, which emerge in buildings for structural or decorative purposes, in balconies and terraces and wall flooring joint spots. It is suitable for use on indoors and outdoors horizontal and vertical surfaces. PRODUCT ADVANTAGES • Does not cause sagging, and highly resistant to wear and tear. • Resistant to high mechanical impacts. • UV resistant. • Free from effects caused by temperature changes and chemicals. • Cured without bubbling. • Maintains elasticity for a long period of time without any loss in volume. • Allows for paint application thereon subsequently. • A ready to use product which is applied easily and rapidly. PERFORMANCE Shore A hardness 50 DIN 53505 Elasticity module 0.6 N/mm 2 DIN EN ISO 8340 Tensile in 100 % elongation 1.8 N/mm 2 DIN 53504 Tensile strength 1.5 N/mm 2 DIN 53504 Rupture strength 7 N/mm 2 DIN 53515 Elongation at breaking %450 DIN 53504 Volume change < %5 The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. APPLICATION PROCEDURE Application Surfaces Indoors and Outdoors Walls; - Cement based plaster - Concrete - Ceramic - Plaster - Natural rock - Marble - Wooden - Aluminum - Metal plate - Brick - Enameled surface Indoors and Outdoors Floors; - Cement based trowel coating - Concrete - Ceramic - Plaster - Natural rock - Marble - Wooden - Aluminum - Metal plate - Brick - Enameled surface Surface Preparation • Application surfaces should be sound, clean, dust free, and free from molding oils and other foreign substances. Such layers that would reduce adherence as oil, grease, dirt, paint, cement foam and rust should be thoroughly cleaned prior to application. • Megaİzo PU Mastik HM adheres excellent to many surface types even without the need for primer application. However; in the cases, where the surface cannot be cleaned from dust completely or is likely to be exposed to high mechanical impact, joint butts should be applied MegaFilm İzo PU or MegaFilm İzo Epo, the surface preparation primer. Application Methods • Sausage formed Megaİzo PU Mastik HM should be placed into a gun with a suitable headpiece, and the gun should be directed through a 45° angle. • Megaİzo PU Mastik HM should be applied continuously at a slow rate, making sure the product fully contacts the joint butts and any air void is not allowed. • Megaİzo PU Mastik HM should, once the surface is filled, be smoothed by applying slight pressure toward the edges of the joints, making sure any overflowing is prevented, and should so be ensured to adhere to the edges. Application Recommendations • Especially in the case of deep joints, the product should be applied with porous backing rod in order to control the thickness and prevent trilateral bonding. • In the cases, where sharp edge lines or very clear joint edges are desired on the surfaces, on which Megaİzo PU Mastik HM is to be applied; masking tape should be used. The masking tape should be removed before the mastic is cured. • In the cases where paint application is intended on Megaİzo PU Mastik HM, a compatibility test is recommended to be conducted in advance. • Megaİzo PU Mastik HM should be consumed rapidly after the opening of the package as the curing of the product begins upon contact with air. • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing. • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +35°C whilst at application. Application Limits Curing time Film formation time The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. APPLICATION INSTRUCTIONS Mixing Ratio Megaİzo PU Mastik HM is a ready to use product. Mixing Equipment Megaİzo PU Mastik HM is a ready to use product. Mixing Period Megaİzo PU Mastik HM is a ready to use product. Application Equipment • Sausage gun • Scraper Equipment Cleaning The equipment used should be cleaned with acetone or polyurethane cleaner following the application before the product hardens. TECHNICAL PROPERTIES Chemical Structure: Moisture cured polyurethane Density: 1.25 gr/cm 3 Color: Gray / White, custom colors upon demand Temperature Resistance: - 40°C and +90°C 2.5 - 3 mm / 24 hours 45 minutes CONSUMPTION The consumption amount varies, depending on the depth and width of the joints on the application surface. Joint Width (mm) Joint Depth (mm) Joint Length (m) 10 8 7.5 15 8 5 20 10 3 25 12 2 30 15 1.33 92
- Page 1 and 2:
gb buildproject www.gbbuildproject.
- Page 3 and 4:
VERY LOW EMISSION ENVIRONMENTALLY F
- Page 5 and 6:
Definitions in Standards 4
- Page 7 and 8:
Points To Be Considered! 6
- Page 9 and 10:
ADHESIVES MegaFix MegaFix K MegaGra
- Page 11 and 12:
Equipment Cleaning The equipment us
- Page 13 and 14:
Mortar Density: 1.85 ± 0.05 gr/cm
- Page 15 and 16:
CONSUMPTION The consumption amount
- Page 17 and 18:
Application Equipment • Steel not
- Page 19 and 20:
Equipment Cleaning The equipment us
- Page 21 and 22:
Application Equipment • Steel not
- Page 23 and 24:
Grain Size: ≤ 600 µm Color: Gray
- Page 25 and 26:
Equipment Cleaning The equipment us
- Page 27 and 28:
Application Equipment • Steel not
- Page 29 and 30:
Equipment Cleaning The equipment us
- Page 31 and 32:
Temperature Resistance: -15°C to +
- Page 33 and 34:
32
- Page 35 and 36:
PACKAGING MegaPro Pastemix is deliv
- Page 37 and 38:
Application Limits Useful time for
- Page 39 and 40:
MegaThermo Adhesive Mortar For Ther
- Page 41 and 42: CONSUMPTION The consumption amount
- Page 43 and 44: PACKAGING BRUFIX is delivered in ne
- Page 45 and 46: 44
- Page 47 and 48: Consumption Amount Calculation Meth
- Page 49 and 50: CONSUMPTION The consumption amount
- Page 51 and 52: CONSUMPTION The consumption amount
- Page 53 and 54: Consumption Amount Calculation Meth
- Page 55 and 56: RECOMMENDED MegaFuga Rustik CONSUMP
- Page 57 and 58: Application Limits Useful time for
- Page 59 and 60: Megaİzo Lastik Mono Cement Based,
- Page 61 and 62: Megaİzo Lastik 7 Polymer Emulsion
- Page 63 and 64: Megaİzo Lastik 10 Polymer Emulsion
- Page 65 and 66: Megaİzo Lastik 15 Polymer Emulsion
- Page 67 and 68: Megaİzo Lastik 3 Hydrophobic Impre
- Page 69 and 70: Megaİzo Lastik 5 Elastomeric Polym
- Page 71 and 72: Megaİzo Lastik 6 Elastomeric Polym
- Page 73 and 74: Megaİzo Kristalize Cement Based, C
- Page 75 and 76: Megaİzo K Polymer Modified, Rubber
- Page 77 and 78: Megaİzo 2K Polymer Modified, Bitum
- Page 79 and 80: Megaİzo CT2/CT3 - CT3 Plus Fibergl
- Page 81 and 82: Megaİzo AR Slate Mineral Coated, A
- Page 83 and 84: Megaİzo PU 7 Polyurethane Based, R
- Page 85 and 86: Megaİzo PU 10 Polyurethane Based,
- Page 87 and 88: Megaİzo PU 15 Polyurethane Based,
- Page 89 and 90: Megaİzo PU 6 Bitumen Modified, Dou
- Page 91: Megaİzo PU Mastik LM Polyurethane
- Page 95 and 96: Megaİzo Stoper Cement Based, Insta
- Page 97 and 98: Megaİzo File Reinforcement And Gla
- Page 99 and 100: REPAIR MORTARS MegaTamir İ MegaTam
- Page 101 and 102: MegaTamir K Cement Based Repair And
- Page 103 and 104: MegaTamir K Yapısal Cement Based S
- Page 105 and 106: 104
- Page 107 and 108: PACKAGING MegaTamir Epo is delivere
- Page 109 and 110: or toluene. The non-cured epoxy on
- Page 111 and 112: FLOORING MATERIALS MegaZemin SL20 M
- Page 113 and 114: MegaZemin BYS Surface Hardening Mor
- Page 115 and 116: 114
- Page 117 and 118: MegaSıva İ Cement Based, Manually
- Page 119 and 120: MegaSıva K Cement Based, Manually
- Page 121 and 122: MegaSıva Saten Cement Based, Manua
- Page 123 and 124: MegaSıva Perlitli Cement Based, Ma
- Page 125 and 126: MegaSıva Elyaflı Cement Based, Ma
- Page 127 and 128: MegaSıva Elyaflı K Cement Based,
- Page 129 and 130: MegaSıva Makine İç Cement Based,
- Page 131 and 132: MegaSıva Makine Dıº Cement Based
- Page 133 and 134: MegaSıva Makine Serpme Cement Base
- Page 135 and 136: PRIMERS MegaFilm MegaFilm Eko MegaF
- Page 137 and 138: MegaFilm Eko Surface Preparatory Pr
- Page 139 and 140: MegaFilm BB High Performance Expose
- Page 141 and 142: MegaFilm İzo PU Polyurethane Based
- Page 143 and 144:
MegaFilm AK Cement Based Binder Pri
- Page 145 and 146:
ADDITIVES & AUXILIARY MATERIALS Meg
- Page 147 and 148:
MegaAntiFreeze 10 Anti-Freeze Morta
- Page 149 and 150:
MegaClean Ready To Use Joint And Su
- Page 151 and 152:
150
- Page 153 and 154:
152
- Page 155 and 156:
Mantotherm Plaster Mortar Plaster M
- Page 157 and 158:
Mantotherm Dekominera - Grain Textu
- Page 159 and 160:
Mantotherm Dekominera - Fine Graine
- Page 161 and 162:
Mantotherm Acrylic Based Exterior P
- Page 163 and 164:
Mantotherm Acrylic Based Grained Ex
- Page 165 and 166:
Mantotherm Platinum Thermal Insulat
- Page 167 and 168:
Mantotherm Rockwool Thermal Insulat
- Page 169 and 170:
168 .
- Page 171 and 172:
170
- Page 173 and 174:
172
- Page 175 and 176:
174
- Page 177 and 178:
176
- Page 179 and 180:
k k k k k k 178
- Page 181 and 182:
k k k k k k Megaİzo CT3 Plus Mega
- Page 183 and 184:
k k k k k k k k k k k 182
- Page 185 and 186:
Areas Of Use 184
- Page 187 and 188:
Areas Of Use 186
- Page 189 and 190:
Areas Of Use 188
- Page 191 and 192:
Notes 190
- Page 193:
gb buildersbase Premier Building Su