BGS 2019-2020 no1

201/20
Screw Extractor Set | 25 pcs.
• allows removal of screws with damaged head
• suitable for internal hexagon, T-Star (for Torx), spline screws (for XZN)
etc.
• extractors with hexagon drive in following sizes: 3 -
4 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 13.5 - 14 - 15 - 16 - 17 - 17.5 - 18 -
19 - 20 - 21 - 21.5 - 22 mm
• also suitable for screws in inch sizes: 1/8" - 5/32" - 3/16" - 7/32" - 1/4" -
9/32" - 5/16" - 11/32" - 3/8" - 11/32" - 7/16" - 15/32" - 1/2" - 17/32" -
9/16" -19/32" - 5/8" - 21/32" - 11/16" - 23/32" - 3/4" - 25/32" - 13/16" -
27/32" - 7/8"
Item #
8548
Damaged Screw Extractor / Bit Set | 13 pcs.
• 6 left threaded screw extractors
• 3 conical from 3 - 14 mm
• 3 cylindric 2 - 3.2 - 4.2 mm
• 6 bits
• cross slot PH 1 / PH2
• cross slot PZ1 / PZ2
• slot 4 / 5 mm
• 1 quick release bit holder
Special Sockets
Item #
5280
Screw Extractor Set | for damaged T-Star (for Torx) T10 - T55 | 11 pcs.
• allows dismantling of screws with damaged T-star (for Torx) screw heads
• 7 extractor bits with 6.3 mm (1/4") hexagon drill shaft for T-Star (for Torx)
screw heads T10 - T15 - T20 - T25 - T27 - T30 - T40, length: 50 mm
• 3 extractor bits with 10 mm (3/8") hexagon drive for T-Star (for Torx)
screw heads T45 - T50 - T55, length: 38 mm
• 12.5 mm (1/2") bit adaptor for 10 mm (3/8") extractor bits
Item #
9170
Screw Extractor Set | 6 pcs.
• for unscrewing broken screws
• in sizes: 1, 2, 3, 4, 5 and 6
• square drive for tool holders
Item #
8549
121