BGS 2019-2020 no1

201/20
Hydraulic Puller | 10 t
• hydraulic ram 10 ton
• 2 extension rods
• one twin head and one triple head
• 3 legs each in 100, 150 und 200 mm lengths:
• max. pulling width:
• 240 mm at 100 mm puller legs length
• 280 mm at 150 mm puller legs length
• 300 mm at 200 mm puller legs length
• clamping width (A) min. / max. in mm: min. 14 mm / max. 62 mm
• puller bolt receiving thread (B): 5/8" x 18 UNF
• clamping bolt distance (C) in mm: 111 mm
• camping bolt thread (D): 5/8" x 18 UNF
• puller bolt distance (E) min. / max. in mm: min. 64 mm / max. 210 mm
Pullers
Item #
7729
Hydraulic Spindle for Puller and Ejector | 12 t
• produces up to 12 t pressure
• to be used with BGS 7729, 1525, 7774
• can be operated by spinner bar or socket
• thread: UN 1-1/2"x16
Item #
Description
7721-X Hydraulic Spindle for Puller and Ejector | 12 t
7721-X-KAPPE Press Cap for BGS 7721-X
Blind Hole Bearing Puller Set | 10 pcs.
• puller bolt and adaptors for use with slide hammer and two-arm pullers
• 1 sliding hammer 910 g, length: 285 mm
• 1 puller with puller width 125 mm
• 5 extraction mandrels for extracting of bearings with inner diameter 7 -
29 mm
• 3 adaptors for extracting components with internal thread M6 x 1.0 - M8
x 1.25 - M10 x 1.5
Item # Description
7710 Blind Hole Bearing Puller Set | 10 pcs.
7710-1 Puller with Spindle | max. 125 mm | for BGS 7710
7710-12x17 Pulling Mandrel with Spindle | 12 x 17 mm | for BGS 7710
7710-18x23 Pulling Mandrel with Spindle | 18 x 23 mm | for BGS 7710
7710-24x29 Pulling Mandrel with Spindle | 24 x 29 mm | for BGS 7710
7710-30x34 Pulling Mandrel with Spindle | 30 x 34 mm | for BGS 7710
7710-8x11 Pulling Mandrel with Spindle | 8 x 11 mm | for BGS 7710
215