BGS 2019-2020 no1

201/20
Crimping Pliers Set with Waterproof Connector Parts | 220 pcs.
• for repairing of the existing cabling and for new wiring
• quick change ratchet crimper (aluminium made)
• H6 pair of jaws for wire sizes: DIN 0.35 / 0.5 - 0.8 mm² (AWG 22 / 20-18)
• H7 pair of jaws for wire sizes: DIN 1.0 - 2.0 / 3.0 mm² (AWG 16-14 / 12)
• release tool for terminals
Pliers
includes following Delphi® waterproof connector parts:
• 25 x 1.4 mm wire seals for wire Ø 1.4 - 1.9 mm
• 30 x 2.5 mm wire seals for wire Ø 2.5 - 3.4 mm
• 25 x 2.8 mm wire seals for wire Ø 2.9 up to 3.8 mm
• 20 x 0.50 - 0.85 mm² male terminals
• 20 x 0.50 - 0.85 mm² female terminals
• 20 x 1.25 - 2.0 mm² male terminals
• 20 x 1.25 - 2.0 mm² female terminals
• 20 x 3 mm² male terminals
• 20 x 3 mm² female terminals
• 3 x 1-pole housings for male terminals
• 3 x 1-pole housings for female terminals
• 2 x 2-pole housings for male terminals
• 2 x 2-pole housings for female terminals
• 1 x 3-pole housings (single-row type) for male terminals
• 1 x 3-pole housings (single-row type) for female terminals
• 1 x 4-pole housings (single-row type) for male terminals
• 1 x 4-pole housings (single-row type) for female terminals
• 1 x 4-pole housings (two-row type) for male terminals
• 1 x 4-pole housings (two-row type) for female terminals
Item #
9097
Crimping Tool Set with 5 Pairs of Jaws
• for crimping insulated connector types
• ratchet mechanism holds the connector in position, facilitates inserting
the cable into the connector
includes following quick interchangeable crimping jaws:
• A1 for 0.5 - 10 mm² insulated heat shrink butt connectors
• A2 for 0.5 - 6 mm² insulated terminals
• A3 for 0.1 - 1.5 mm² miniature insulated connectors
• A4 for 0.5 - 2.5 mm² insulated 90 degree flag connectors
• A5 for 0.5 - 6 mm² closed end insulated connectors and heat shrinkable
terminals
Item #
9098
344