BGS 2019-2020 no1

201/2
3-in-1 Clutch / Variator Tool for Piaggio
• for blocking and removing the variator and clutch bell
• integrated hex wrench for loosening the coupling nut, 34 mm, pin pitch:
55 mm
• made of corrosion-resistant stainless steel
• to be used as OEM 14569-PI
• suitable for many models of following manufacturers: Aprilia, Derbi,
Gilera, Italjet, Peugeot, Piaggio, Vespa
Item #
8729
Spark Plug Puller (without Sliding Handle) | internal Hexagon 22 mm | for BMW Motorcycles
• for pulling the spark plugs plug and loosening the 22 mm internal hexagon
front axle
• note: additional sliding bar required, not suitable for water-cooled R 1200
GS
• sliding bar bore: 19 mm
• material: aluminium
Item #
8939
Synchronous Carburetor Tester | with 4 synchronous clocks | 29 pcs.
• for synchronous measurement on 2 - 4 carburetors with vacuum
connection on the carburetor
• after adjusting and checking the valve leeway, the carburetors should be
synchronised
• all-purpose
• perfect measurement results with mechanically faultless engines
• to be used while the engine is running
• suitable for cars and motorcycles
• 4 pressure gauges Ø 92.5 mm fitted on a plate
• 4 rubber hoses 7.2 x 5 x 750 mm
• 4 hose clamps with spare sealing rings
• 4 connectors 53 mm (M6 x 0.75)
• 4 connectors 60 mm (M6 x 1.00)
• 4 extensions 3.9 x 98 mm
• 4 extensions 3.9 x 170 mm
• 1 adapter
• negative pressure measuring range: 0 TO -70 cm Hg (0 to -30 In Hg)
• pressure measuring range: 0 to 14 PSI (0 to 1 kg/cm²)
Speciality Tools Motorbike
Item #
62670
Motorcycle Battery Disconnect Adaptor
• for disconnecting the battery when not used for a prolonged period - can
also by used to prevent theft
• electrical isolation of the battery negative pole
• suitable for batteries with flat M6 terminals
• dimensions (L x W x H): 64 x 21 x 19 mm
Item #
9310
453