BGS 2019-2020 no1

201/20
External / internal Puller, 2-arm | 50 - 145 mm / 70 - 170 mm
Pullers
• suitable as inside and outside puller
• Clamping range as inside puller 50 - 145 mm
• Clamping range as external puller 70 - 170 mm
• slotted puller arm also suitable for small sleeves, bearing, gears, pulleys
etc.
• structured puller arm for better grip
• good centering by cone-shaped pressure piece
• incl. flat pressure piece
• spindle drive is possible via internal square 1/2", external hexagon 21
mm or rod
• spindle made of carbon steel
• max. clamping width outside puller 170 mm
• max. clamping width inside puller 145 mm
• min. clamping width outside puller 70 mm
• min. clamping width inside puller 50 mm
Item #
7737
Miniature Puller, 3-arm | 19 - 45 mm
• especially for quick pulling of small ball-bearings
• for air-condition, generators, electronic pumps, impact tools, standard
house holding machines, etc.
Item #
7738
External / internal Puller Set, 2 and 3-arm | 13 pcs.
• puller depth: 105 - 210 mm and 265 mm
• puller legs are suitable for 2- and 3-leg crossbars, puller width: up to 135
mm
• free moving legs allow internal and external pulling operations
• hardened pulling feet (width approx. 25 mm, thickness approx. 4 mm)
• 2 spindles approx. 165 mm and 280 mm with M14 x 1.5 mm thread
Item # Description
7760 External / internal Puller Set, 2 and 3-arm | 13 pcs.
7760-LEER Empty Case for BGS 7760
7760-1 Spare Hook Leg | for BGS 7760
7760-2 Spare Claw for Puller | extra slim | 3 pcs. | for BGS 7760
212