BGS 2019-2020 no1

201/2
Rotor Puller
• suitable for generator and
ignition system
• M27x 1.00: Honda, Suzuki, Yamaha
• M26x 1.50: Bosch
Item # Description
7746 Rotor Puller | M27 x 1.0
7747 Rotor Puller | M22 x 1.5 / M26 x 1.50
Rotor Puller | M22 x 1.5 | for Suzuki motorcycles
suitable for the following Suzuki models:
• GV 1400G (1986 - 1988), LS 650 (1987 - 2009)
• LTA 400 (2002 - 2004), LTA 400 (2006 - 2008)
• LTA 400F (2002 - 2008), LTA 450X (2007 - 2009)
• LTA 500F (2000 - 2007), LTA 700X (2005 - 2007)
• LTA 750X (2008 - 2009), LTF 400 (2002 - 2004)
• LTF 400 (2006 - 2008), LTF 400F (2002 - 2008)
• LTF 500F (1998 - 2007), VL 1500LC (1998 - 2004)
• VL 1500LC C90 (2005 - 2009)
• VS 1400GLP (1987 - 2004)
• VS 1400GLP ( Daewoo 2005 - 2009
• VS 700 GLP (1986 - 1987)
• VS 750 GLP (1988 - 1991), VS 800GL (1992 - 1995)
• Saab 800 as of 1990 - 1993, 1800 as of 2006 - 2007
• material: carbon steel
• surface finish: phosphated
Item #
8466
Speciality Tools Motorbike
Rotor Puller | M27 x 1.0 | for Aprilia, Benelli, Beta, CPI, Italjet, KTM, MBK, Yamaha
• left hand thread M27 x 1.0
• M16 clamping spindle with sliding bar
• internal diameter 18 mm
suitable for e.g. the following bicycles:
• Aprilia Area, Gulliver, Scarabeo, Sonic, SR 50, etc.
• Benelli 491 50, K2 50, Naked 50, Pepe 50, etc.
• Beta Ark 50, Eikon 50, Quadra 50 , Tempo 50 etc.
• CPI Aragon 50, Crab 50, Formula 25, GTR 50, etc.
• Italjet Dragster 50KTM Ark 50, Kross 50MBK CS 50, CW 50, EW 50, YH
50, YN 100, etc.
• Yamaha CA 50, CS 50, CW 50, EW 50, YE 50, etc.
• length: 97 mm
• material: steel (S45C)
Item #
8726
445