BGS 2019-2020 no1

201/2
Flaring Tool
• for flaring of brake and hydraulic pipes according to SEA and DI
• can be used on copper, brass, aluminium and steel pipes
• for coated and non-coated pipes
• for inside and outside flaring
• incl. 4 pairs of pressure pieces 3/16" / 4.75 mm - 1/4" - 6 mm - 8 mm
• 5 mm die blocks and punches also available
Item # Description
3057 Flaring Tool
3057-13 Pre-Press Mandrel Step0 for BGS 3057
3057-14 Die Blocks | for BGS 3057 | Ø 4.75 mm (3/16")
3057-15 Die Blocks | for BGS 3057 | Ø 6.3 mm (1/4")
3057-16 Die Blocks | for BGS 3057 | Ø 5 mm
3057-17 Die Block | for BGS 3057 | Ø 6 mm
3057-18 Die Block | for BGS 3057 | Ø 8 mm
3057-19 Punch Step1 for BGS 3057 | Ø 4.75 mm (3/16")
3057-20 Punch Step1 for BGS 3057 | Ø 6.3 mm (1/4")
3057-21 Punch Step2 for BGS 3057 | Ø 4.75 mm, 6.3 mm (3/16", 1/4")
3057-22 Punch Step1 for BGS 3057 | Ø 5 mm
3057-23 Punch Step1 for BGS 3057 | Ø 6 mm
3057-24 Punch Step2 for BGS 3057 | Ø 5 mm, 6 mm
3057-25 Punch Step1 for BGS 3057 | Ø 8 mm
3057-26 Punch Step2 for BGS 3057 | Ø 8 mm
Flaring Tool | DIN | 4.75 mm (3/16")
• for flaring of 4.75 mm (3/16") brake pipes
• easy to operate
• can be used on mounted brake lines
• 2 component handle
• required spanner sizes: 10 and 17 mm
• incl. flaring grease
Brake
Item #
8917
Flaring Tool | SEA and DIN 4.75 mm (3/16")
• for easy and fast flaring of 4.75 mm (3/16") brake pipes, according to
SAE and DIN
• allows single or double flares (only SAE)
• can also be used on installed brake lines
• required spanner sizes: 10 & 17 mm
• 2-component handle
• incl. flaring grease
Item #
8918
465